User manual ROWENTA RH8829WO CIGARILLO

[. . . ] User cleaning and care should not be carried out by children unless they are aged 8 years and over and supervised. Keep the appliance and its lead out of reach of children under 8 years of age. 1 • Precautions before use Read the instructions carefully and then store them safely. €¢ Your vacuum cleaner is an electric appliance: it must always be used under normal conditions. [. . . ] It is advisable to charge the vacuum cleaner immediately after each use in order to always have it available with a fully charged battery. Thus, you will gain the maximum benefit from its cleaning and autonomous performance functions. However, in case you plan to be absent for a long period of time (on vacation, for example), it is advisable to unplug the charger. Otherwise, the autonomous performance function could be diminished due to automatic power loss. 3 • Turning on the appliance Unplug the charger cord from the vacuum cleaner. If the charger remains connected to both the power point and to the appliance, the latter will not function. Hold the vacuum cleaner by the handle and slide the Stop/Start button downwards, towards one of the following three speeds (fig. Please note: always make sure that the wheels located at the back of the base are clean. 15 • "Medium": Used for better vacuuming of all floor types, and in case of light dirt marks (3. €¢ "Turbo": Used for optimum vacuum performance on all floor types, and in case of strong dirt marks (3. Vacuum cleaner running times* for each usage speed (with a fully charged battery): Speed 1 « Minimum » 14. €¢ Do not immerse the appliance in water. ELECTRO-BRUSH MALFUNCTION The electro-brush does not function properly or makes an unusual sound • Either the rotating brush or the axis is blocked: turn off the appliance and clean them. €¢ The brush is worn out: visit an authorized Service Center in order to have the brush changed. €¢ The belt is worn out: if the belt makes noise, it means that it is slipping because it’s worn out. Visit an authorized Service Center in order to have the belt changed. The electro-brush stops while you are vacuuming • The thermal security feature has been activated: Turn off the vacuum cleaner by moving the Stop/Start button to the Stop position (2. Check to see if any solid object is blocking the rotation of the brush. If this is the case, remove the object and clean the electro-brush (fig. 10), then you may keep using the vacuum cleaner. The electro-brush moves with difficulty If you find that your vacuum cleaner slides with difficulty along surfaces, progressively reduce the speed until you reach the « Minimum » position (3. If the problem persists, take your appliance to the authorized Rowenta Service Center nearest to your home. [. . . ] Wash your hands and rinse your eyes with clean water. Take the appliance to a collection spot so that it can be disposed of properly. 19 REPAIRS IMPORTANT: If you notice that your vacuum cleaner is not functioning properly, before any revision, turn it off by placing the Stop/Start button in the Stop position. Repairs should only be carried out by specialists using original replacement parts. [. . . ]