User manual ROWENTA RU5053EH PRO

[. . . ] 1 • Conditions of use Your vacuum cleaner is an electrical device: it must be used under normal conditions of use. Use and store the appliance out of reach of children. Never leave the appliance operating without supervision. Do not hold the sucker attachment or tube close to your eyes and ears. [. . . ] €¢ For rugs and carpets: use the nozzle in the retracted brush position or the turbobrush* – (animal hair). €¢ For parquet and smooth floors: use the nozzle in brush position or, for a better result, use the parquet nozzle*. €¢ For corners and areas which are difficult to reach: us the crevice tool*. • For furniture: use the upholstery nozzle*. Always stop and unplug your vacuum cleaner before changing 2 • Connecting the cord and starting the appliance ATTENTION Never operate Unwind the power cord completely, plug your vacuum cleaner in and press the On / Off pedal the vacuum cleaner without the filtration system (foam, microfilter and filter). Adjust the suction power with the mechanical power regulator* on the power nozzle: open the slider on the power nozzle to manually reduce suction power, e. : on fragile *Depending on model: this is either equipment specific to certain models or available as an optional accessory. 8 After use, stop your vacuum cleaner by pressing the On / Off pedal and unplug it (fig. Rewind the power cord by pressing the cord winder pedal (fig. EN Carry your vacuum cleaner easily thanks to its carry handle (10). Do not carry your vacuum cleaner by the dust compartment handle (fig. 9 ATTENTION Leave the microfilter to dry and make sure it is thoroughly dry before putting it back in the appliance. Replace the microfilter and the black foam filter and close the cover. 5 • Clean the HEPA filter (17) IMPORTANT If after cleaning the black filter foam and microfilter, your vacuum cleaner does not resume its previous performances, clean the HEPA filter. Otherwise, clean the HEPA filter once a year. Unlock the air outlet grid on the side of the appliance by rotating it slightly to the left (fig. Remove the HEPA filter from its housing (fig. Replace the air outlet grid and lock it by rotating it slightly clockwise. Put the parts of the filtration system (4) back in place: - replace the separation grid (4b) on the separator (4a) (fig. 32) - replace the separation compartment (4c) on the unit (4a + 4b) (fig. 33-34) - then replace the entire separation system (4a+4b+4c) in the vacuum (fig. EN 7 • Clean your vacuum cleaner Wipe the body of the vacuum cleaner and the accessories with a soft damp cloth, then dry using a dry cloth. [. . . ] If your vacuum cleaner is not vacuuming properly or is making a whistling noise • An accessory, the tube, the flexible hose, the separator (4a), the air/dust separation grid (4b) or the separation compartment (4c) are partially blocked: unblock them. €¢ The dust compartment is full: empty it and wash it. €¢ The vacuum cleaner lid is not properly positioned: close the lid tightly. €¢ The dust compartment is poorly positioned: put it back properly. [. . . ]