User manual ROWENTA X-TREM POWER RO6821EA

[. . . ] Home cleaning and maintenance of the appliance must not be carried out by children unless they are aged 8 or over and are supervised. Always keep the appliance and power cord out of reach of children under 8 years. EN 1 • Conditions of use Your vacuum cleaner is an electrical appliance: It must be used under normal operating conditions. Always use and store the appliance out of the reach of children. [. . . ] - For corners and difficult areas: use the crevice tool*. - For furniture and fragile surfaces: use the built-in brush ERGO COMFORT (EASY BRUSH) (depending on model). IMPORTANT: Never use the vacuum cleaner without a dust bag and filter (cartridge) WARNING: Always switch off and unplug your vacuum cleaner before changing the accessories. 2 • Plugging in the power cord and switching on the appliance Completely unwind the power cord, plug in your vacuum cleaner (fig. 8 EN VACUUMING Note: you can use your vacuum cleaner in a horizontal position or in a vertical position, particularly for vacuuming stairs or curtains. With the mechanical power regulator on the handle: Slide open the mechanical adjuster to manually reduce suction power and avoid allowing the nozzle to remain ‘stuck’ to the surface being cleaned (fig. If your model is equipped with the ERGO COMFORT* handle, open the regulator as appropriate: • Position (MIN) for vacuuming delicate textiles (net curtains, textiles) • Position • Position (Medium) for the daily cleaning of all lightly soiled floor surfaces (MAX) for vacuuming hard floor surfaces and heavily soiled rugs and carpets 3 • Storing and transporting the appliance After use, switch off your vacuum cleaner by pressing the On/Off pedal, and unplug (fig. Retract the power cord by pressing the power cord rewind pedal (fig. In a vertical position, place the nozzle in the parking position (fig. In a horizontal position, place the nozzle in the parking position (Fig. 13) You can now transport and store your vacuum cleaner in the parking position (fig. 1 • Changing the dust bag The dust bag full indicator lets you know that the dust bag is full or saturated. If you observe a reduction in the efficiency of your appliance, set the power to maximum and hold the nozzle above the floor. If the indicator stays red, change the dust bag. A) If your vacuum cleaner is equipped with a Wonderbag* (17a) : IMPORTANT: UNIVERSAL Wonderbag* dust bags are available from your retailer or from Approved Service Centres. CAUTION: COMPACT Wonderbag* dust bags cannot be used in this appliance. Using them will damage the appliance and invalidate the guarantee. Remove the hose from the suction opening (Fig 2) Open the cover of your vacuum cleaner (fig. 9 EN CLEANING AND MAINTENANCE 2 • Changing the microfilter* (ref RS-RT3735) IMPORTANT: Replace the microfilter every six bag changes. RS-RT3735 are available from your retailer or from Approved Service Centres. Open the cover of your vacuum cleaner (fig. 16), and then remove the microfilter* cartridge (fig. [. . . ] Wash it with fresh water and leave it to dry for at least 24 hrs. 39) Ensure that the (H)EPA* filter cartridge is completely dry before replacing in the appliance. Replace the (H)EPA* filter cartridge in its compartment (fig. Replace the bag support with the textile bag* in the bag compartment (fig 29) Check that the (H)EPA* filter cartridge is correctly positioned before closing the cover. [. . . ]