User manual ROYAL SOVEREIGN RSR-685

[. . . ] Royal Sovereign LAMINATORS OWNER'S MANUAL RSH-1050/1650 , RSR-685/1050 PLEASE READ AND SAVE INSTRUCTIONS EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 -1- TABLE OF CONTENTS TOPICS INSTRUCTION PAGE ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------3 3 4 4 5 6~7 8 9 10 10 11 12 13 14 15 16~19 20 20~21 22 23 23 23 24 24 25 25 26 27 SAFETY PRECAUTIONS CHARACTERISTICS SPECIFICATIONS --------------------------------------------------------------------NAMES OF MAJOR PARTS OF MACHIN-------------------------------------------HOW TO INSTALL THE REWINDER --------------------------------------------HOW TO INSTALL THE UNWINDER -----------------------------------------------SETTING UP FILM HANGING FILM ----------------------------------------------------------------------------------------------------------------------------------------- 1. HOT FILM ----------------------------------------------------------------------------2. COLD FILM --------------------------------------------------------------------------CONTROL OF ROLLER PRESSURE ------------------------------------------------------------------------------------INSTRUCTIONS FOR CONTROL PANEL 1. LCD WINDOW ---------------------------------------------------------------------2. FUNCTIONS OF BUTTONS ----------------------------------------------------3. HOW TO USE BUTTONS ---------------------------------------------------LAMINATING STEPS -----------------------------------------------------------------1. HOT LAMINATING ------------------------------------------------------------2. COLD LAMINATING --------------------------------------------------------------TIPS FOR REMOTE CONTROL AND FOOT SWITCH ------------------------METHOD FOR USING CUTTER -----------------------------------------------------*. CROSS CUTTER -------------------------------------------------------------------IMPORTANT SAFETY CONCERNS IT'S NOT OUT OF ORDER ---------------------------------------------MAINTENANCE ------------------------------------------------------------------------------------------------------------------------------------SPARE PARTS -------------------------------------------------------------------------WARRANTY ----------------------------------------------------------------------------SPEED & TEMPERATURE ADJUSTMENT---------------------------------------- EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 -2- INSTRUCTION Thank you for purchasing a Royal Sovereign Roll Laminator. It has been designed and manufactured to provide years of continuous service in the professional environment. To insure high quality lamination, please read this instruction manual thoroughly. This manual will provide you with complete operating and maintenance information. [. . . ] And with memory function, you don't need to set machine every time you laminate. ***Terms*** LCD DISPLY BUTTON 1. LCD WINDOW 1. Initial display status. EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 - 13 - It displays you the last working condition when turned on. 2. Is displayed when the preset temperature is reached. 3. Blinking Indicates to wait till blinking stops. Current temperature is higher or lower than the preset temperature. 4. Temperature 1) Shows the preset temperature 2) You can check the current temperature on the heat shoe by pressing T-Check 6. The operator can use 9 different lamination speeds. Press SPEED button then speed display mode is blinking 6 times Before blinking finish, the operator can change the speed with or 3. Each time you press the button, buzzer will ring. SPEED ***Memorizing Working condition and Using the memorized working condition*** 1) Memorize working condition EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 - 16 - 1. Operator can memorize 9 working conditions. 2. Choose working condition by pressing button after pressing and speed, press MEMOR MEMORY and button. button. 3. It is memorized if buzzer is ringing with blinking. * If you change the temperature or speed when LCD UPPER LOWER SPEED MEMORY screen is still blinking, you have to press button after changing. MEMORY 4. When you memorize another working condition, you can do above 2 and 3 operation over. 2) Use the memorized working condition. 1. Operator can choose one of 9 memorized working conditions. 2. Press MEMORY then or to select a working condition. 3. After the blinking stops, it is set the working condition MEMORY you selected and shows the working condition on the display. ***Check current temperature on the hot rollers. *** 1. When you press T-CHECK button, the present temperature will be shown on the screen and will EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 - 17 - blink five times. 2. After this, it automatically returns to the previous state. T-CHECK ***Cold mode*** 1. You can do cold lamination with this function. 2. Press the C/HOT button to show "Cold" on the display. 4. Speed can be varied 1 or 4 by selecting button. 5. You release the machine from cold mode by C/HOT pressing button. 6. Everytime you press the button, buzzer is ringing 7. ST/BY mode is not working at COLD mode. SPEED MEMORY C/HOT ST/BY ***STND-BY (Saving Electricity while you are not operating for a while)*** 1. When press ST/BY button will display mode, machine on the screen and STND-BY mode is set at 80C. When machine is in EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 - 18 - condition wouldn't work. Press the it will revert to the previous working. ST/BY button and 3. When machine runs, you can't change it to the mode. [. . . ] After use of Remote Control, attach it to the left side of rear of machine METHOD FOR USING CUTTER **Cross Cutter** 1. It is on the back side of the machine. 2. After lamination, move cutter to a point about 1/3 of the width of lamination 3. Grasp film with one hand and press the cutter cutter downward and slide it to the direction intending to cut with another hand. 4. Press the cutter and slide it the other way. IMPORTANT SAFETY CONCERNS 1. Please be cautious that neck tie, necklace, long hair, clothes are kept well away while operation. [. . . ]