User manual ROYAL TC100 GOLD 2005

[. . . ] Royal offers a complete line of accessories for your clock - including replacement ink roll and timecards - to make replacement of parts quick, safe, and inexpensive. To reorder supplies, please see the Accessories page at the end of this instruction manual or call the Royal Supply Center at 1-888-261-4555. 2 EnglishVersion 12/6/05 11:06 AM Page 3 SAFETY INSTRUCTIONS Always follow basic safety precautions when using this product to reduce risk of injury, fire, or electric shock. Read and understand all instructions in the owner's manual. Do not install the TC100 in places subject to high humidity and excessive dust, in areas exposed to direct sunlight or in places subject to temperatures below 32°F (0°C) or above 104°F (40°C). [. . . ] Press Mode until "P1" is displayed. Press Setting until the number of the desired print format is displayed. Press Mode until the display returns to the normal operational mode. PROGRAM MODE P2 - 12 Hour/24 Hour Format The default setting for the time is the 12 hour setting which also displays AM or PM. The display also shows the date (default) or if you prefer, the seconds can be displayed. Press Mode until "P2" is displayed. Press Setting to change to the 24 hour format. "dd" (for date display) will blink. To change the "dd" (display date) to seconds, press Setting. Press Mode until the display returns to the normal operational mode. 10 EnglishVersion 12/6/05 11:06 AM Page 11 DAYLIGHT SAVINGS TIME The TC100 can be programmed to automatically adjust for Daylight Savings Time. PROGRAM MODE P3 - Daylight Savings Time (DST) - AHEAD To program the TC100 to automatically turn the time ahead one hour. (For example, at 2:00 AM on the first Sunday in April. ) 1. Press Mode until "P3" is displayed. Press Setting until the desired month (i. e. Press Setting to choose the number 1, 2, 3, 4 or 5 (week of the month - i. e. Press Setting until the desired day flashes - i. e. Press Mode until the display returns to the normal operational mode. To turn off the DST, reprogram to select "- -" . PROGRAM MODE P4 - Daylight Savings Time (DST) - BACK Use the following steps to program the TC100 to automatically turn the time back one hour. (For example, at 2:00 AM on the last Sunday in October. ) 1. Press Mode until "P4" is displayed. Press Setting until the desired month (i. e. Press Setting to choose the number 1, 2, 3, 4, or 5 (week of the month). For example, "5" for the last weekend of the month. Press Setting until the desired day flashes - i. e. Press Mode until the display returns to normal operational mode. To turn off the DST, reprogram to select "- -". 11 EnglishVersion 12/6/05 11:06 AM Page 12 WALL MOUNT INSTALLATION NOTE: Do not mount the TC100 directly to plasterboard, paneling, brick, or concrete block. [. . . ] · Be sure to include your complete name, address and day-time telephone number. · Bring or ship, prepaid and insured, via a traceable shipping method the above Product to the nearest Royal Authorized Service Center location or to the Royal Corporate Service Center. The Royal and/or the Service Center cannot be held responsible for any loss or damage that occurs while in transit. For Authorized Service Centers within your local area, please call 1-888-261-3888 or +1-732-563-9944. [. . . ]