User manual RUSSELL HOBBS 13793

[. . . ] 8 Consume filtered water within one to two days. 9 Route the cable so it doesn't overhang, and can't be tripped over or caught accidentally. 10 Unplug the stand when not in use, before moving and before cleaning. Let the kettle cool down before cleaning and storing away. [. . . ] 16 If the kettle hasn't been used for over 2 weeks, we recommend you: · Empty the kettle · Open the lid, take the water tank out of the kettle, turn the water filter to your left to release it from the water tank, then follow steps 3 to 15, to prepare the water filter. filling 1 Put the stand on a stable, level surface. Route the cable so it doesn't overhang, and can't be caught or tripped over. warning keep clear, steam may escape from the lid. 2 Check that the kettle is off ­ lift the switch up (0). 5 Fill the water tank with at least 2 cups of cold water, but don't fill over the rim, or the water will bypass the filter. This will give just over 1 litre of filtered water. If you want more, gently add more water to the water tank, keeping your eye on the rising water level in the kettle. 6 Replace the lid and press down to lock it. 7 Don't let the filtered water in the kettle exceed the -max- (1. 5 litre) mark. If it does, the water left in the water tank can't be filtered. 8 Check the lid is closed, otherwise the kettle may not switch off when it boils. switching on 1 Check that the kettle is off ­ lift the switch up (0). 3 Gently position the kettle on the stand ­ take care not to spill any water. The lights will come on, and the kettle will heat up. nb You don't have to wait for the water to be filtered before switching the kettle on. Water passes through the water filter quickly, and all the water will be filtered before the kettle finishes boiling. switching off 1 When the water has boiled, the kettle will switch off automatically, the switch will return to the "off" position (0), and the lights will go out. 2 To switch off manually, move the switch to 0, or lift the kettle off the stand. 5 the water filter To ensure you get the best filtered water from your kettle, you have to change the water filter regularly. The water filter will filter 200 litres of water, which is approximately 8 weeks, for a typical family, in a hard water area. We recommend that the water filter is changed at least once every 10 weeks. changing the water filter 1 Open the lid 2 Lift the water tank out of the kettle. 3 Hold the water tank and turn the water filter to your left, to release it from the water tank. 5 Prepare the new water filter for use, as described on page 4. the reminder Remembering when to change the water filter is perhaps the hardest part. Don't worry ­ we've thought of this. We've built a reminder into the stand, so you know when next to change the water filter. [. . . ] Don't use a non-rewireable/moulded plug unless the fuse cover is in place. If you remove the plug, dispose of it. 7 spare parts Note the Model No (on the rating label) and the parts you need, ring 0845 658 9700 or email service@saltoneurope. com for prices, then purchase using VISA or MASTERCARD. service The product isn't user-serviceable. If it's not working, read the instructions, check the plug fuse and main fuse/circuit breaker. If it's still not working, consult your retailer. [. . . ]