User manual RUSSELL HOBBS 13994

[. . . ] 5 Don't use harsh cleaning agents or solvents. service Before you phone, have the Model No. The product isn't user-serviceable. If it doesn't work, read the instructions, try the plug fuse and main fuse/circuit breaker. If it still doesn't work, consult your retailer. [. . . ] 15 Slide the filter into its guides, and fit the lid. guarantee Defects affecting product function appearing within 1 year of purchase will be corrected by replacement or repair provided the product is used and maintained in accordance with the instructions. Documentation, packaging & product specifications may change without notice. online www. russellhobbs. co. uk for more products connection The kettle must be earthed. Fit a 13A BS1362 fuse in a 13A BS1363 plug. Fit the green/yellow wire to E or E, the blue to N, the brown to L. Don't use a non-rewireable plug unless the fuse cover is fitted. If you remove the plug, dispose of it. wheelie bin symbol To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal waste, but recovered, reused, or recycled, using an official recovery system. 439-959 instructions and guarantee 5 Don't open the lid till boiling has finished. 6 Pour slowly, and don't over-tilt the kettle. 8 Check the lid is fully closed before switching the kettle on, or it may not switch off. 9 Fill with at least 2 cups of water, but don't fill past max, or it may spit boiling water. 10 Lift the kettle off the stand to fill or pour. 11 Use the kettle only for heating water. 12 Use the kettle only with the stand supplied. 13 Don't use it with a timer or remote control. 14 If the kettle or cable malfunctions or suffers damage, return the kettle, to avoid hazard. keeping warm 12 To keep the water warm after boiling, slide the warm switch towards the kettle. 14 After use, you must move the warm switch away from the kettle. It won't turn itself off, even if there's no water in the kettle. , If you forget, it won't do any harm, but it will waste electricity ­ let the kettle cool before filling, to avoid spitting. window glow ­ colours none kettle is disconnected blue stand is powered, boil switch is off red boil switch is on, the water is heating household use only before using for the first time 1 Fill, boil, empty, and rinse ­ do this 3 times. check the water level after pouring 15 When keeping water warm, check that the water level doesn't get below about 2 cups. 16 If it does, top it up, and reboil. Read the instructions and keep them safe. Remove all packing, but keep it till you check the kettle. filling with water caution keep clear of steam from the lid 2 Lift the kettle off the stand. 4 Use at least 2 cupfuls, but don't fill past max. [. . . ] 8 Put the kettle on the stand ­ the window will glow blue. 9 Move the boil switch to 6 ­ the window will glow red, and the water will start to heat up. boiling with insufficient water 22 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off. 23 To avoid cycling on and off, take it off the stand, and leave it to go completely cold. [. . . ]