User manual RUSSELL HOBBS DOME KETTLE

[. . . ] to hand, as we won't be able to help without it. It's on the rating plate (usually beneath the product). The product isn't user-serviceable. If it's not working, read the instructions, check the plug fuse and main fuse/circuit breaker. [. . . ] Fit the green/yellow wire to E or E, the blue to N, the brown to L. Don't use a nonrewireable plug unless the fuse cover is fitted. If you remove the plug, dispose of it. guarantee Defects affecting product function appearing within 1 year of purchase will be corrected by replacement or repair provided the product is used and maintained in accordance with the instructions. Documentation, packaging & product specifications may change without notice. wheelie bin symbol To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal waste, but recovered, reused, or recycled. 550-315 instructions and guarantee 5 Don't open the lid till the kettle has cooled. 6 Pour slowly, and don't over-tilt the kettle. 8 Check the lid is fully closed before switching the kettle on, or it may not switch off. 9 Fill with at least 2 cups of water, but don't fill past max, or it may spit boiling water. 10 Lift the kettle off the stand to fill or pour. 11 Use the kettle only for heating water. 12 Use the kettle only with the stand supplied. 13 Don't use it with a timer or remote control. 14 If the kettle or cable malfunctions or suffers damage, return the kettle, to avoid hazard. general 11 Lift the kettle off the stand before pouring. 12 Pour slowly and don't over-tilt the kettle. 13 Don't tilt the kettle backwards, water might get on to the control area. 14 If this happens, sit the kettle somewhere warm for 12 hours to dry before using it. 15 Don't worry about moisture on the stand. The steam used to switch the kettle off is condensed and vented under the kettle. 16 Don't worry about discolouration on the floor of the kettle. It's due to the bonding of the element to the kettle floor. household use only before using for the first time 1 Fill, boil, empty, and rinse ­ do this 3 times. using with insufficient water 17 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off. [. . . ] 3 The scald hazard lasts long after boiling, so: a) put the stand on a stable, level surface b) keep it away from worktop edges c) route the cable so it doesn't overhang, and can't be tripped over or caught d) wind excess cable beneath the stand 4 Don't touch hot surfaces. switch on 6 Plug the stand into the wall socket. 8 Move the switch to 1 ­ the light will glow. descale ­ even in soft water areas 7 Limescale is normally visible. 8 Phosphate scale isn't generally visible, but it's there, even in soft water areas. 9 Scale overheats the element, reducing its life, and may trigger the boil-dry cut-out. [. . . ]