User manual RUSSELL HOBBS GLASS ESPRESSO MAKER

[. . . ] 12 Check the kettle is properly located on the stand before switching on. 13 Don't switch on unless the kettle contains at least 2 cups of water. 14 Don't fill past max, or it may spit boiling water. 15 Remove the kettle from its stand before filling or pouring. [. . . ] 18 Use the kettle only with the stand supplied (and vice versa). 19 This appliance must not be operated by an external timer or remote control system. 20 Don't use the kettle if it's damaged or malfunctions. 21 If the cable is damaged, return the kettle, to avoid hazard. household use only before using for the first time 1 Fill to max, boil, discard the water, then rinse. Do this three times, to remove manufacturing dust, etc. positioning 2 Put the stand on a stable, level surface. Route the cable so it doesn't overhang, and can't be caught or tripped over. 3 Wind excess cable beneath the stand 3 filling warning keep clear, steam may escape from the lid. 4 Remove the kettle from the stand. 6 Fill with at least 2 cups of water, but not above max 7 If you overfill, the kettle may spit boiling water. 8 Close the lid, and press it down to close. 9 Check the lid is closed, or the kettle won't switch off when it boils. switching on 10 11 12 13 Plug the stand into the wall socket. Put the kettle on the stand ­ take care not to spill. 11 Use a descaler suitable for plastic products (all kettles have plastic parts). 12 Follow the instructions on the descaler, rinse several times, then fill, boil and discard the water, to ensure no residues are left. , Products returned under guarantee with faults due to scale will be subject to a repair charge. water filter 13 Scale particles suspended in the water may give it a cloudy or greasy appearance. The filter will prevent these particles going into your drink. If you see deposits on the filter, clean it, otherwise the performance of your kettle will drop, your drinks may contain scale, and the water inside the kettle may look cloudy. cleaning the filter 14 Check your hands are free from soap, or anything which might leave a taint. 15 Switch the kettle off, and let it cool. 16 Remove the lid. release the filter 17 Grip the tab on the top of the filter, and pull it upwards, out of the guides. 18 Rinse the filter under a running tap while brushing with a soft brush. 19 Rinse the kettle, in case scale particles have fallen inside. replace the filter 20 Slide it down, into the guides. caution don't use the kettle without the filter in place ­ it won't switch off and may spit boiling water. 5 6 7 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. [. . . ] To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Don't use a non-rewireable plug unless the fuse cover is in place. If you remove the plug, dispose of it. wheelie bin symbol To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal waste, but recovered, reused, or recycled. service If you ring Customer Service, please have the Model No. to hand, as we won't be able to help you without it. [. . . ]