User manual RUSSELL HOBBS GLASS TOUCH 14743-56 1,7L

[. . . ] Use and store the appliance out of reach of children. 2 Don’t put the kettle, stand, cable, or plug in any liquid; don’t use the kettle in a bathroom, near water, or outdoors. 3 The scald hazard lasts long after boiling. Keep the kettle, stand, and cable away from the edges of worktops and out of reach of children. [. . . ] 5 Fill with at least 2 cups of water, but not above max. 6 If you overfill, the kettle may spit boiling water. 7 Close the lid, and press down to lock it. 8 Check the lid is closed, or the kettle won’t switch off when it boils. Switching on 9 Plug the stand into the wall socket. 10 Put the kettle on the stand – take care not to spill. 11 The buttons will flash twice, then glow steadily. Variable temperature 12 Touch the button marked with the temperature you want. Pulsing element 16 Initially, you’ll hear the element pulse on, off, and on again, as it works to control the temperature accurately. 17 When it reaches the set temperature, the button will stop flashing and glow steadily. 18 After 5 minutes, the light will go out, and the appliance will go to sleep. Changing temperature 19 If you get the temperature wrong, and want to change it: a) touch the correct button b) the button will flash while the water heats or cools c) when it reaches the set temperature, the button will stop flashing and glow steadily , Reducing the temperature may take a long time – you may prefer to pour the hot water away, and refill with cold water. 91 switching off 20 To switch off manually, touch the glowing button again. 21 The lights will go out, and the appliance will go to sleep. 22 To save electricity, unplug the stand. General 23 Remove the kettle from the stand before pouring. 24 To avoid the risk of splashing, pour slowly and don’t over-tilt the kettle. 25 Don’t tilt the kettle backwards, water might get on to the control area. If this happens, let the kettle dry before use – sit it somewhere warm for 12 hours. 26 When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam used to switch off automatically, which then condenses and escapes via vents under the kettle. 27 You may see some discolouration on the floor of the kettle. [. . . ] 50 Descale regularly, (at least monthly) to keep your kettle in good working order. 92 51 Use a descaler suitable for use in plastic products (most products have plastic parts). Follow the instructions on the descaler, rinse several times, then fill, boil and discard the water, to ensure no residues are left. , Products returned under guarantee with faults due to scale will be subject to a repair charge. [. . . ]