User manual RUSSELL HOBBS POLISHED MONTANA KETTLE

[. . . ] 17 Slide the filter up and out of its guides. 18 Brush the filter under a running tap. 19 Rinse the kettle, to remove scale particles. 20 Slide the clean filter back into its guides. [. . . ] Documentation, packaging & product specifications may change without notice. wheelie bin symbol To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal waste, but recovered, reused, or recycled. 439-953 instructions and guarantee 5 Don't open the lid till boiling has finished. 6 Pour slowly, and don't over-tilt the kettle. 8 Check the lid is fully closed before switching the kettle on, or it may not switch off. 9 Fill with at least 2 cups of water, but don't fill past max, or it may spit boiling water. 10 Lift the kettle off the stand to fill or pour. 11 Use the kettle only for heating water. 12 Use the kettle only with the stand supplied. 13 Don't use it with a timer or remote control. 14 If the kettle or cable malfunctions or suffers damage, return the kettle, to avoid hazard. 14 If this happens, sit the kettle somewhere warm for 12 hours to dry before using it. 15 Don't worry about moisture on the stand. The steam used to switch the kettle off is condensed and vented under the kettle. 16 Don't worry about discolouration on the floor of the kettle. It's due to the bonding of the element to the kettle floor. using with insufficient water 17 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off. 18 To prevent the kettle cycling on and off, remove it from the stand. 19 Sit the kettle on the work surface till it's cold. 20 Don't fill the kettle till it's cold, or it may spit. household use only before using for the first time 1 Fill, boil, empty, and rinse ­ do this 3 times. care and maintenance 1 Unplug the stand, and let the kettle cool. 3 Wipe inside and outside with a damp cloth. 5 Don't put the kettle or stand in liquid. 6 Don't use harsh cleaning agents or solvents. Read the instructions and keep them safe. [. . . ] 12 Follow the instructions on the descaler, then rinse, fill, boil, and empty, to avoid residues. , Products returned under guarantee with faults due to scale will incur a repair charge. switch on 6 Plug the stand into the wall socket. 8 Press the switch ­ it'll light up. switching off 9 The kettle will switch off when it boils. 10 Alternatively, lift the kettle off the stand. general 11 Lift the kettle off the stand before pouring. [. . . ]