User manual RUSSOUND 857

[. . . ] SPECIFICATIONS Dimensions: 3 1/4"W x 1 7/8"H x 1"D (83 x 47 x 25mm) Weight: 6oz (. 2kg) LIMITED WARRANTY The Russound 857 IR Receiver is fully guaranteed for two (2) years from the date of purchase against all defects in materials and workmanship. For this warranty to apply, the unit must be installed and used according to its written instructions. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. [. . . ] Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. IR INTERFACE IR INTERFACE 1 2 EMITTERS 1 2 EMITTERS 3 4 3 4 POWER STATUS IR RECEIVER CONNECTION STATUS 5 Forbes Rd. Newmarket, NH 03857, USA 603. 659. 5170 · Fax 603. 659. 5388 e-mail: tech@russound. com Come visit us at: 858 In-Wall IR Receiver 854 Mini Tabletop IR Receiver IR RECEIVER Infrared Connecting Block 857 1 2 Instruction Manual 3 4 5 6 DESIGNED IN USA MADE IN KOREA EMITTERS 857 INFRARED CONNECTING BLOCK IR CONFIRM IR COMMON IN IR RECEIVER IN +12VDC +12VDC STATUS POWER +12VDC STATUS SIGNAL GND PRODUCT OVERVIEW The 857 Connecting block connects IR receivers, power supply and emitters, together to interface the IR system to the audio / video components. IR Receiver In: This is a three terminal 1/8" plug that is common to many of the free standing IR receivers. This will connect the power, ground and signal. Signal is Tip, ground is the ring and power is the sleeve. Figure 3 KEY FEATURES Six emitter output connections. Status power receptacle with LED indicator. Three conductor 1/8" receptacle for interfacing with many brands of freestanding IR receivers. 6) Two conductor 1/8" receptacle for common IR input. 7) Large detachable IR receiver connection. 8) Compact size for mounting near audio equipment. 1) 2) 3) 4) 5) 854 MINI TABLETOP IR RECEIVER POWER GND +12VDC STATUS POWER 857 INFRARED CONNECTING BLOCK IR CONFIRM 1 2 +12VDC IR RECEIVER IN EMITTERS 3 IR COMMON IN +12VDC 4 5 GND SIGNAL STATUS 6 SIGNAL DESIGNED IN USA MADE IN KOREA IR Common In: This is a two terminal 1/8" plug. This can be connected the IR output of a stereo receiver or the common IR output of an audio distribution system. Figure 4 RUSSOUND PR-4Zi GND FUSE 10A IR OUT CMN 1 2 857 CONNECTIONS Power: Connect a 12 VDC 200 mA to 1A power supply to the power jack. [. . . ] Figure 2 TO SWITCHED AC OUTLET ON REAR OF STEREO RECEIVER +12VDC 2 +12VDC SHIELD WIRED TO GROUND IR RECEIVER IN EMITTERS 3 IR COMMON IN +12VDC 4 5 GND STATUS 6 SIGNAL ST IR GND V+ DESIGNED IN USA MADE IN KOREA 2-TWISTED PAIR WIRE STATUS POWER Emitter Outputs: Connect up to 6 emitters to the emitter jacks labeled 1-6. Place the emitters on the source equipment. LED LIGHTS GREEN WITH POWER 857 INFRARED CONNECTING BLOCK IR CONFIRM 1 2 +12VDC IR RECEIVER IN EMITTERS 3 Figure 6 +12VDC TIP IS POSITIVE +12VDC GND STATUS +12VDC 6 IR RECEIVER IN POWER SIGNAL DESIGNED IN USA MADE IN KOREA IR COMMON IN LED LIGHTS BLUE FOR IR CONFIRMATION +12VDC 5 GND STATUS SIGNAL DESIGNED IN USA MADE IN KOREA IR Confirm: When an IR signal is received the IR confirmation blue LED will flash. Mounting: Mount the 857 near the source equipment that the emitters are attached to. IR EMITTERS TO EQUIPMENT IR COMMON IN STATUS 857 INFRARED CONNECTING BLOCK IR CONFIRM 4 5 1 2 EMITTERS 3 4 6 [. . . ]