User manual RUSSOUND 858

[. . . ] OTHER RUSSOUND PRODUCTS LIMITED WARRANTY The Russound 858 IR Receiver is fully guaranteed for two (2) years from the date of purchase against all defects in materials and workmanship. For this warranty to apply, the unit must be installed and used according to its written instructions. [. . . ] Write the RA number on the shipping label and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket NH 03857 Russound sells product only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. Decora® is a trademark of Leviton Corporation EMITTERS 3 IR COMMON IN +12VDC 4 5 GND STATUS 6 SIGNAL DESIGNED IN USA MADE IN KOREA 857 CONNECTING BLOCK 5 Forbes Rd. Newmarket, NH 03857, USA 603. 659. 5170 · Fax 603. 659. 5388 e-mail: tech@russound. com Come visit us at: Decora® Style In-Wall Infrared Receiver 858 Instruction Manual IR RECEIVER Patented PRODUCT OVERVIEW The 858 IR Receiver receives IR signals from a handheld IR remote control and relays this to the audio/video equipment for operation from another room. Mounts to a single gang J-Box using a Decora® cover plate. The status line can be turned on or off by setting the jumper on back of the 858 as shown in Figure 3. Figure 3 STATUS ON STATUS OFF ST IR GND V+ FEATURES · Stylish Decora® design. Available in white or almond colors · Dual color LED. Green for system status and blue for talk back. Receives IR from many types of remotes. ST IR GND V+ MOUNTING Mount the 858 to the J-Box using the screws that are supplied. Mount the cover plate (not included) to the IR receiver. See Figure 4. INSTALLATION Connect the 858 to the 857 (or equivalent) connecting block using 2 twisted pair wire. [. . . ] Plug the power supply into the switched outlet on the stereo receiver. When the receiver is on, the power supply will turn on the system status line and illuminate the LED Green of the 858. 12 VDC Figure 2 +12VDC STATUS POWER 857 INFRARED CONNECTING BLOCK IR CONFIRM 1 2 +12VDC IR RECEIVER IN IR COMMON IN +12VDC GND STATUS SIGNAL DESIGNED IN USA MADE IN KOREA 857 CONNECTING BLOCK EMITTER PORTS EMITTERS 3 4 5 6 [. . . ]