User manual RUSSOUND 860P PHANTOM

[. . . ] PRODUCT OVERVIEW The SaphIR 860P Phantom Plasma receives IR signals from a handheld IR remote control and relays these signals to the audio-video equipment for operation from another room. It mounts to a flat surface with two-sided tape (included). SaphIR 860P Phantom Mini Infrared Receiver CFL Friendly Instruction Manual FEATURES · Plasma-friendly - can be placed near plasma TV and displays · CFL friendly - allows installations in areas with compact fluorescent lighting. [. . . ] Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. If service is necessary, it must be performed by Russound. Damage to or destruction of components due to excessive power voids the warranty. In these cases, the repair will be made at the owner's expense. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization number. Write the RA number on the shipping label and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket NH 03857 Russound sells product only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. CONNECT TO 846C OR 1201A POWER SUPPLY 12 VDC +12VDC STATUS 857 INFRARED CONNECTING BLOCK IR CONFIRM 1 +12VDC IR RECEIVER IN POWER IR COMMON IN +12VDC GND STATUS SIGNAL DESIGNED IN USA MADE IN CHINA 857 CONNECTING BLOCK SIGNAL (White) +12VDC (Black) GND (Black) EMITTER PORTS 2 EMITTERS 3 4 5 6 5 Forbes Rd. [. . . ] Russound offers both CAT-5e cable (AWCAT5) and shielded twisted-pair cable (AW2260AB) which are suitable for IR installations. Contact Russound for ordering information. SIGNAL (White) GND (Black) 860P Phantom +12VDC (Black) 860P SIGNAL Terminal Strip Green Green/White Brown Brown/White CAT-5e BL 857 SIGNAL +12VDC GR/GRW +12VDC Blue/White Open Blue Blue/White GND BR/BRW OR/ORW BLW GND GND GND Orange Pair Open CONNECT TO 846C OR 1201A POWER SUPPLY 12 VDC +12VDC STATUS 857 INFRARED CONNECTING BLOCK IR CONFIRM 1 CAT-5e cable Green Green/White Brown Brown/White +12VDC IR RECEIVER IN POWER 2 EMITTERS 3 IR COMMON IN +12VDC 4 5 GND STATUS Orange Orange/White Blue 6 SIGNAL DESIGNED IN USA MADE IN CHINA Drain Orange Pair and Blue/White to GND on 857 857 CONNECTING BLOCK SPECIFICATIONS Receive Frequency Range: 36kHz to 58kHz Transmit Frequencies: 40kHz and 56kHz Range: On Axis - 30ft to 50ft (9. 1-15. 2m) 30º Off Axis - 5ft to 15ft (1. 5-4. 6m) Power: 12VDC 31mA max Dimensions: 2. 09"W x 0. 47"H x 0. 5"D (53. 1 x 11. 9 x 12. 7mm) Mounting Cord Length: 78. 74" (200cm) Finishes: Black, Silver PACKAGE INCLUDES: SaphIR 860P Phantom IR Receiver (1) Terminal Strip (1) Screws (2) Two-way Mounting Tape (1) [. . . ]