User manual RUSSOUND ISDR1

[. . . ] By providing both normally open and normally closed relay contacts, the ISDR1 can be used for other applications where a versatile relay is needed for control from a ComPoint keypad. The ISDR1 is designed for surface mounting. To facilitate connection to a door strike release unit, it should be located in an accessible area near the door, such as an attic, basement, or closet space between the door station and the hub. 1 instructions before installing or operating the product. Retain documents. Keep this manual in a convenient place for reference. Heed warnings. [. . . ] Damage to or destruction of components due to excessive power voids the warranty. In these cases, the repair will be made at the owner's expense. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. Before returning a unit for repair, call Russound at 603. 659. 5170 for a Return Authorization number. Write the RA number on the shipping label and ship to: Russound, 5 Forbes Road, Newmarket NH 03857. Russound sells product only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. as radiators, heat registers, stoves or other appliances that produce heat. Use the right power. Don't connect the product directly to electrical line voltage. Use only the power adapter provided with the product, described in the product specifications or installation instructions, or as marked on the product. Ground product properly. Make sure the product's means of grounding or polarization is not defeated. Keep product clean. From time to time, wipe off the product with a clean soft cloth. Don't use abrasive materials, thinners, alcohol or other chemical solvents or materials. Avoid spills and foreign objects. Make sure liquids and objects don't get into the product through any openings. Get professional service. Have the product serviced only by qualified service personnel when: · Liquids have spilled or objects have fallen into the product · The product has been exposed to rain · The product doesn't appear to operate normally · The product is damaged Don't attempt to service the product yourself. If you have any questions, call Russound at 1-800-638-8055 or 603-659-5170. 2 5 Forbes Road, Newmarket NH 03857 USA Tel 603. 659. 5170 · Fax 603. 659. 5388 www. russound. com Copyright © 2006 Russound. All trademarks are the property of their respective owners. Specifications are subject to change without notice. Russound is not responsible for typographical errors or omissions. [. . . ] Typically a door strike release connects between the COM and NO terminals. The NC terminal is available to provide an interruptible signal path for other applications. Operation The ISDR1 obtains its operational power from the ComPoint hub. It passes signals to and from the door station on all leads of the CAT-5 cable except one, which is used to activate the module from the hub upon receiving a command from a keypad. When activated this way, the ISDR1's relay remains active for 3 seconds. [. . . ]