User manual RYOBI 18V ONE AUTOSHIFT DRILL DRIVER CDA1802G

[. . . ] CDA1802 AUTOSHIFT DRILL DRIVER OWNER'S OPERATING MANUAL TM DESCRIPTION 1. Rotation Selector (Forward/Reverse/Center Lock) 6. Depress Latched To Release Battery Pack 12. To Increase Torque 3 2 1 4 9 8 5 11 7 6 Fig. [. . . ] Liquid ejected from the battery may cause irritation or burns. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. n This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. n This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they do not play with the appliance. INSTRUCTIONS FOR SAFE HANDLING Make sure that the tool is only connected to the voltage marked on the name plate. Never use the tool if its cover or any bolts are missing. If the cover or bolts have been removed, replace them prior to use. Maintain all parts in good working order. Always secure tools when working in elevated positions. Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES : The use of accessories or attachments other than those recommended in this manual might present a hazard. REPLACEMENT PARTS : When servicing use only identical replacement parts. SPECIFICATIONS Voltage Chuck (mm) Switch No load speed (drill mode): - Lo speed - Hi speed Clutch Max. Spade Bit (mm) Weight - not incl. battery pack (KG) 18 V 2-13 Variable speed 0 - 450 min-1 0 - 1500 min-1 24 Positions 55 38 1. 89 2 English SPECIFICATIONS MODEL BATTERY PACK (not included) BPL-1820 BPL-1815 ABP1801 CDA1802 BATTERY PACK (not included) ABP1801 CHARGER (not included) BCL-1800 BCS618 CHARGER (not included) ACR-180 BATTERY PROTECTION FEATURES Ryobi 18 V lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life. Under some operating conditions, these built-in features may cause the battery and the tool it is powering to act differently from nickel-cadmium batteries. During some applications, the battery electronics may signal the battery to shut down, and cause the tool to stop running. To reset the battery and tool, release the trigger and resume normal operation. NOTE: To prevent further shut down of the battery, avoid forcing the tool. If releasing the trigger does not reset the battery and tool, the battery pack is depleted. If depleted, the battery pack will begin charging when placed on the lithium-ion charger. [. . . ] Depress the switch trigger to start the drill. Move the drill bit into the workpiece, applying only enough pressure to keep the bit cutting. Do not force the drill or apply side pressure to elongate a hole. WARNING Be prepared for binding at the bit breakthrough. [. . . ]