User manual RYOBI 18V ONE RECIPROCATING SAW VARIABLE SPEED LRS180G

[. . . ] LRS-180 CORDLESS RECIPROCATING SAW OWNER'S OPERATING MANUAL DESCRIPTION 1. Lock-Off Button Depress Here To Pull Switch Trigger Switch Trigger Blade Clamp Lock / Release Lever Saw Blade Battery Pack (Not Included) 7. Latches Depress Latches To Release Battery Pack Blade Clamp To Install/To Release To Lock Blade Shown Correct In Saw Bar 2 3 1 1 5 3 1 4 Fig. 6 Important! It is essential that you read the instructions in this manual before operating this machine. [. . . ] Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension cord. Complies with AS/NZS 60335. SPECIFICATIONS Motor Maximum Cutting Thickness (wood) Blade Stroke No Load Speed Switch MODEL BATTERY PACK (not included) BPL-1820 BPL-1815 18 V 60 mm 22 mm 0-3000 min-1 Variable Speed COMPATIBLE CHARGER (not included) BCL-1800 BCS618 BCL1418 BCL-1800 BCS618 BCL1418 ACR1800 260022029 ACC1800 LRS-180 ABP1801 ABP-1815 OPERATION TO REMOVE / ATTACH BATTERY PACK (NOT INCLUDED) See Figure 2. TO REMOVE Locate latches on side of battery pack and depress both sides to release battery pack from your saw. [. . . ] Clamp the work firmly and cut close to the clamping point to eliminate any vibration of the work being cut. When cutting conduit pipe or angle iron, clamp work in a vise if possible and cut close to the vise. To cut thin sheet material, "sandwich" the material between hardboard or plywood and clamp the layers to eliminate vibration and material tearing. WARNING Always remove battery pack from your saw when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. [. . . ]