User manual RYOBI 280R-SERIALS-206058151-AND-GREATER

[. . . ] The jet must not be directed at persons, animals, electrical devices, or the machine itself. WARNING: When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. WARNING: This Appliance has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the appliance. [. . . ] Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury. 280R-SERIALS-206058151-AND-GREATER manual. indd Sec2:4 09-12-15 9:22 ENGLISH(Original Instructions) PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS Description Rated voltage Rated Pressure (P) Allowable Pressure (Pmax) Power Rating Rated water flow (Q) Maximum Water Inlet pressure (Pin max) Maximum Water Temperature Protection Degree LWA (sound power level) LPA (sound pressure level) Vibration Unit V~/Hz Bar (Mpa) Bar (Mpa) W L/min Bar (Mpa) °C IEC 529 dB(A) dB(A) m/s2 Figure 7 21. Handle release button KNOW YOUR PRESSURE WASHER See Figure 2. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the task you are attempting. Before using this product, familiarize yourself with all operating features and safety rules. DETERGENT TANK Remove the cap from the detergent tank to add detergent to the pressure washer. TRIGGER Depressing this trigger allows you to dispense water at high pressure. TRIGGER LOCK-OUT The trigger lock-out prevents accidental use of the trigger. ON/OFF SWITCH This switch turns the pressure washer on and off. 5 280R-SERIALS-206058151-AND-GREATER(RATED DESC. ) 220-240/50 100(10) 140(14) 1800 6. 67 7(0. 7) 40 IP25 88. 6; K=3dB(A) 75. 8; K=3dB(A) 0. 851; K=1. 5m/s2 DESCRIPTION Figure 2 1. Line up the handle assembly with the holes. Depress the button on the handle assembly and insert into the holes on the pressure washer. To connect the garden hose to the pressure washer: Uncoil the garden hose. NOTE: There must be a minimum of 3 metres of unrestricted garden hose between the pressure washer intake and the garden tap. With the garden tap turned completely off, attach the end of the garden hose to the coupler on the pressure washer water intake. Tighten by hand, water that has flown through backflow preventers is considered to be non-potable. HOW TO DRAW WATER FROM A WATER TANK, BUCKET, POND, ETC. To draw water from a water tank, bucket, pond, etc. you must first get a suction hose kit, which is made up of a compatible hose and water filter. Ryobi recommends the Expand-itTM Suction Hose Kit. Connect the suction hose to the water inlet on the pressure cleaner and drop the other end into a water tank, bucket, pond, etc. (Fig. 14) Ensure your water container is full of water (Fig. 15) Connect the power cord to an electricity source & turn on at power point. Make sure the high pressure nozzle is not connected & turn the unit on at the on/ off switch. [. . . ] This warranty is only applicable where the product is used for personal and non-commercial purposes. This warranty does not cover damage or liability caused by / due to misuse, abuse, accidental or intentional acts by user, improper handling, unreasonable use, negligence, failure by end user to follow operating procedures outlined in the user's manual, attempted repair by non-qualified professional, unauthorised repair, modification, or use of accessories and/or attachments not specifically recommended by authorised party. Please see your local dealer for list of authorised service centres in your area. This warranty does not cover belts, brushes, bags, bulbs or any part which ordinary wear and tear results in required replacement during warranty period. [. . . ]