User manual RYOBI 400W RANDOM ORBITAL SANDER KIT ERO240VK

[. . . ] ERO240VK RANDOM ORBITAL SANDER OWNER'S OPERATING MANUAL Double Insulated THANK YOU FOR BUYING A RYOBI RANDOM ORBITAL SANDER Your new random orbital sander has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free performance. CAUTION: Carefully read through this entire owner's manual before using your random orbital sander. Pay close attention to the Rules for Safe Operation, Warnings and Cautions. If you use your random orbital sander properly and only for what it is intended, you will enjoy years of safe, reliable service. Thank You again for buying Ryobi tools. SAVE THIS MANUAL FOR FUTURE REFERENCE 4 1 3 Fig. [. . . ] Any power tool that can not be controlled with the switch is dangerous and must be repaired. GENERAL SAFETY RULES Disconnect the plug from the power source before making any adjustments, changing accessories or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. WARNING A suitable breathing respirator must be worn while sanding lead paint, some woods and metal to avoid breathing the harmful/toxic dust or air. SPECIFICATION Input Wattage No load speed Orbital diameter Pad size Net weight 240 V ~ 50 Hz 240 W 7000min-1 - 12000 min-1 2. 4 mm 125 mm 1. 7 kg APPLICATIONS Use only for the purposes listed below: Sanding on wood surfaces. Removing rust from and sanding steel surfaces. ON / OFF Switch Quick Change Hook & Loop Pad. Dust bag with frame Variable Speed Control Sandpaper Livetool IndicatorTM FEATURES Your sander is suitable for sanding with coarse, medium and fine grit sandpaper. It will produce a fine scratch free finish when used to sand with the grain on wood surfaces. Your sander has a comfortable palm grip handle that provides maximum one-hand comfor t and reduces operator fatigue during continuous sanding operations. Your sander also has a built in dust collection that collects dust through punched holes in the sandpaper and cushion. Before attempting to use your sander, familiarize yourself with all operating features and safety requirements. SWITCH (1) This tool is equipped with a simple switch control. To turn the sander "ON", slide the switch to the left. Slide the switch to the right to turn the sander "OFF". SPECIFIC SAFETY INSTRUCTIONS FOR SANDERS Always wear safety goggles and a dust mask when sanding, especially sanding over-head. [. . . ] Gradually lower your sander on the work with a slight forward movement. Move it slowly using forward and backward strokes. The weight of the unit supplies adequate pressure, so let the sandpaper and sander do the work. Applying additional pressure only slows the motor, rapidly wears sandpaper and greatly reduces sander speed. [. . . ]