User manual RYOBI 410R-SERIALS-803093824-THRU-911038434

[. . . ] SDS Bit (not included) 8 1 2 3 4 6 5 7 10 9 Fig. 1 Fig. 2 8 13 8 11 12 14 7 Fig. 3 Fig. 4 17 18 15 19 6 5 16 Fig. 5 17 3 17 3 Fig. 6 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. [. . . ] Any power tool that can not be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. English GENERAL POWER TOOL SAFETY WARNINGS Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Wear a face mask or dust mask if the drilling operation generates dust. INSTRUCTIONS FOR SAFE HANDLING BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. REPLACEMENT PARTS: When servicing use only identical replacement parts. SPECIFICATIONS Voltage No load speed Hammer blows (Blows per minute) Impact energy Maximum Drill Capacity: Wood Steel Concrete (Hammer drilling) Recommended hammer drilling range Bit Connection type Weight - not incl. battery pack BATTERY PACK (not included) BPL-1820 BPL-1815 CRH1801 ABP1801 ABP-1815 18 V 0-1000 min-1 0-4000 min-1 1. 5J 16 mm 13 mm 12 mm 4-12 mm SDS-plus 2. 2 Kg MODEL COMPATIBLE CHARGER (not included) BCL-1800 BCS618 BCL-1800 BCS618 ACR1800 260022029 SPECIAL SAFETY RULES Use the auxiliary handle supplied with the tool. Loss of control can cause personal injury. Wear ear protection with rotary hammers. Exposure to noise can cause hearing loss. 2 English OPERATION WARNING Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. If releasing the trigger does not reset the battery and tool, the battery pack is depleted. If depleted, the battery pack will begin charging when placed on a lithium-ion charger. TO INSTALL A BATTERY PACK See Figure 2. [. . . ] Tighten the auxiliary handle by turning the knob clockwise (11). BATTERY PROTECTION FEATURES Ryobi 18 V lithium-ion batteries are designed with features that protect the lithium-ion cells and maximise battery life. Under some operating conditions, these built-in features may cause the battery and the tool it is powering to act differently from nickel-cadmium batteries. During some applications, the battery electronics may signal the battery to shut down, and cause the tool to stop running. To reset the battery and tool, release the trigger and resume normal operation. [. . . ]