User manual RYOBI 41AD875A034-41BD875A034

[. . . ] 6 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. [. . . ] Power tools are dangerous in the hands of untrained users. POWER TOOL USE AND CARE English GENERAL POWER TOOL SAFETY WARNINGS Maintain power tools. Check for misalignment or bindling of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. the work area. Do not let visitors contact the tool or extension cord. Complies with AS/NZS 60745. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. IMPACT DRIVER SAFETY WARNINGS Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. INSTRUCTIONS FOR SAFE HANDLING BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage and stress. An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: 2 English CHARGER SAFETY a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. That extension cord is properly wired and in good electrical condition. Do not operate charger with a damaged cord or plug. If damaged, have it replaced immediately by a qualified serviceman. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. [. . . ] NOTE: To prevent further shut down of the battery, avoid forcing the tool. If releasing the trigger does not reset the battery and tool, the battery pack is depleted. If depleted, the battery pack will begin charging when placed on the lithium-ion charger. SPECIFICATIONS Voltage Coupler Switch No load speed Max. Torque Blows Per Minute Weight (not included battery pack) MODEL BATTERY PACK (not included) BPL-1820 BPL-1815 BID1821 ABP1801 ABP-1815 18 V 6. 35 mm Variable speed 0 - 2600 min-1 170 Nm 0-3200 BPM 1. 24 Kg COMPATIBLE CHARGER (not included) BCL-1800 BCS618 BCL-1800 BCS618 ACR1800 260022029 3 English OPERATION TO INSTALL BATTERY PACK See Figure 2. helps reduce the possibility of accidental starting when not in use. [. . . ]