User manual RYOBI 41ASGBVG051-41BSGBVG034-6038570

[. . . ] Subject to technical modifications. English GENERAL POWER TOOL SAFETY WARNINGS 3. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. [. . . ] Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating power tools in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. English hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. The use of attachments or accessories not recommended can result in serious personal injury. SPECIAL SAFETY RULES Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. Following this rule will reduce the risk of eye injury. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury. 2 English APPLICATIONS You may use this product for the purposes listed below: Light-duty stapling into wood This product will accept RYOBI One+ 18 V lithium-ion battery packs and RYOBI One+ 18 V nickel-cadmium battery packs. BATTERY PROTECTION FEATURES RYOBI One+ 18 V lithium-ion batteries are designed with features that protect the lithium-ion cells and maximise battery life. Under some operating conditions, these built-in features may cause the battery and the tool it is powering to act differently from nickel-cadmium batteries. During some applications, the battery electronics may signal the battery to shut down, and cause the tool to stop running. To reset the battery and tool, release the trigger and resume normal operation. NOTE: To prevent further shut down of the battery, avoid forcing the tool. [. . . ] Hold stapler upside down; squeeze latch and slide base open. Place staples in channel, legs facing upward and close base. Make sure the latch is securely locked in place. The depth adjustment knob increases or decreases the force with which a staple is driven into the workpiece. [. . . ]