User manual RYOBI 41BD780G034

[. . . ] 2 SPEED POWER SPEED SPEED POWER POWER 10 11 5 12 15 17 14 16 13 8 Fig. 5 SPEED SPEED 2 18 POWER SPEED POWER 4 POWER 19 Fig. 7 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. [. . . ] Loss of control can cause personal injury. BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the product before beginning operation. OPERATION WARNING Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below: Drilling in all types of wood products (lumber, plywood, panelling, composition board, and hard board) Drilling in ceramics, plastics, fiberglass, and laminates Drilling in metals Mixing paint This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs. WARNING Always remove battery pack from your drill when you are assembling parts, making adjustments, assembling or removing bits, cleaning, or when not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury. 3 TO REMOVE BATTERY PACK Depress the latches on each side of the battery pack. Remove the battery pack from the drill. [. . . ] The proper setting depends on the type of material and the size of screw you are using. There are twenty-four torque indicator settings located on the front of the drill. Rotate the adjusting ring to the desired setting. Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotates. Hold the drill firmly and place the bit at the point to be drilled. [. . . ]