User manual RYOBI 510R-21AK515G034

[. . . ] Subject to technical modifications. English GENERAL POWER TOOL SAFETY WARNINGS 3. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. [. . . ] Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the surface leading to possible loss of control and serious injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance is not intended for use by young children or infirm persons. Adequate supervision by a 2 English SPECIFICATIONS Voltage Input power Stroke per minute Stroke length Max cutting capacity Wood Steel 85 mm 8 mm TRANSPARENT GUARD See Figure 3. For your protection, a transparent guard has been included with the saw. It is used to shield wood particles from the eyes. Release lock-on button and your saw will continue running. To release the lock, depress the trigger switch and release. If you have the lock-on feature engaged during use and your saw becomes disconnected from power supply, 3 English WARNING To avoid possible serious injury, always wear safety goggles or safety glasses with side shields. Keep hands and fingers away, from the motor housing and blade clamp and do not reach underneath work while blade is cutting. To close: Push the door up with your thumb or finger. WARNING Do not insert saw blade into air vents. They could come in contact with electrically live internal parts and cause electric shock, resulting in serious injury. WARNING To avoid serious personal injury, do not use saw without safety guard properly in place. WARNING Your saw should never be connected to power supply when you are assembling parts, making adjustments, installing or removing blades or when not in use. Disconnecting your saw will prevent accidental starting which could cause serious injury. Rest the front of the saw base on the workpiece and align cutting edge of the blade with the line on your workpiece. Make sure the power cord is out of the way of saw blade and not in the line of cut. Start your saw and move it forward on the work surface. Apply downward pressure to keep the saw steady and only enough forward pressure to keep the blade cutting. VARIABLE SPEED See Figure 9. [. . . ] The jigsaw has a built-in LED worklight. This feature is convenient when working in close or tight areas where additional light is needed. Whenever the trigger switch is depressed, the LED worklight will illuminate. LIVE TOOL INDICATOR This tool features a live tool indicator which illuminates as soon as the tool is connected to the supply. This warns the user that the tool is connected and will operate when the switch is pressed. WARNING Failure to unplug your saw could result in accidental starting causing possible serious injury. [. . . ]