User manual RYOBI 600W TEK SCREWDRIVER KIT ESD600K

[. . . ] May be used in conjunction with other symbols or pictures. WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Do not attempt to operate this tool until you have read thoroughly and understood completely, safety rules, etc. [. . . ] Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. Normal sparking of the motor could ignite fumes. KEEP HANDLES DRY, CLEAN AND FREE FROM OIL AND GREASE. Never use brake fluids, gasoline, petroleum based products, or any strong solvents to clean your tool. Watch what you are doing and use common sense. Before further use of the tool, a guard or any other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or any other part that is damaged should be properly repaired or replaced by an authorised service centre. DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by authorised service centre. DO NOT OPERATE THIS TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR ANY MEDICATION. THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Due to continued product refinement policy, product features and specifications can and will change without notice. Check current features and specifications with your retailer. FEATURES Adjusting Sleeve Locking Sleeve Reversing Switch Trigger Lock-On Button Fig 1. SCREW DRIVER SAFETY PRECAUTIONS 1. Never touch the chuck or other metal parts of the screw driver when screwing into walls, boards or other surfaces covering electrical wiring. Hold the screw driver around plastic parts to prevent electric shocks. Match bit holder to screw size to prevent damage to the screw head. Never cover vents since they must always be open for proper motor cooling. STANDARD ACCESSORIES 8mm magnetic bit holder, 10mm magnetic bit holder, 8mm plastic nose piece, 10mm plastic nose piece. APPLICATION (Only use your tool for the purposes listed below. ) Tightening and loosening teks screw. [. . . ] This guarantee will not apply if the tool is damaged by accident or if repairs arise from normal wear and tear. The Company accepts no additional liability pursuant to this guarantee for the costs of travelling or transportation of the Product or parts to and from the service dealer or agent - such costs are not included in this guarantee. Certain legislation, including the Trade Practices Act, 1974 (as amended) and other state and territorial laws give rights to the buyer and impose liability on the seller in certain circumstances. Nothing herein shall have the effect of excluding, restricting or modifying any condition, guarantee, right or liability imposed, to the extent only that such exclusion, restriction or modification would render any term herein void. RYOBI TECHNOLOGIES AUSTRALIA PTY. [. . . ]