User manual RYOBI 6922

[. . . ] The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Learn its applications and limitations as well as the specific potential hazards related to this tool. [. . . ] Everyday eyeglasses have only impact resistant lenses, they are not safety glasses. Wear hearing protection during extended periods of operation. Keep proper footing and balance at all times. Do not use tool on a ladder or unstable support. Secure tools when working at elevated levels. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. Normal sparking of the motor could ignite fumes. KEEP HANDLES DRY, CLEAN AND FREE FROM OIL AND GREASE. Never use brake fluids, gasoline, petroleum based products, or any strong solvents to clean your tool. Secure the work piece to prevent it from moving under the sander. WARNING: The sander should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury. WARNING: Unsecured work pieces could be thrown towards the operator, causing injury. WARNING: Exercise caution when using this tool. Careless actions, for even a fraction of a second, can result in serious personal injury. WARNING: Keep your head away from the sander and the sanding area. Your hair could be drawn into the sander causing serious injury. Page 3 4 OPERATION 2. Place the sander on the work piece so that all of the sanding pad surface is in contact with the work piece. CAUTION: To avoid damaging the motor from overheating, be careful not to let your hand cover the air vents. Turn on the sander and move it slowly over the work piece. Hold the sander in front and away from you, keeping it clear of the work piece. Start the sander and let the motor build to its maximum speed, then gradually lower the sander onto the work piece. Move the sander slowly across the work piece using small circular motions. 5) The sander is packed with sanding sheets and pads designed for a variety of uses. To change sheets, simply pull the used sheet off the base and attach the desired sheet by pressing the sheet or pad onto the base of the sander. Fig. [. . . ] Should service become necessary during the warranty period, the owner should contact the Authorised Ryobi Retailer from whom the Product was purchased, or the nearest Company Branch Office. In order to obtain guarantee service, the owner must present the sales docket and Guarantee Certificate to confirm date of purchase. This product is sold by the dealer or agent as principal and the dealer has no authority from the Company to give any additional guarantee on the Company's behalf except as herein contained or herein referred to. Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturer's recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no repairs, alterations or modifications have been attempted by other than an Authorised Service Agent. [. . . ]