User manual RYOBI 700R-SERIALS-611000001-AND-UP

[. . . ] Your manual contains special messages to bring attention to potential safety concerns as well as operating and servicing information. Please read all the information carefully to ensure satification and safe use. Wear eye, hearing and head protection when operating this equipment. Keep all bystanders at least 15m (50 ft) away. [. . . ] Cover the blade with the blade protector before storing the unit, or during transportation. Always remove the blade protector before using the unit. If not removed, the blade protector could become a thrown object as the blade begins to turn. After engine stops, keep rotating blade in heavy grass or pulpy weeks until it stops. Do not operate the brushcutter unless the blade guard is firmly secured in place and in good condition. Use heavy gloves while installing or removing blades. Always stop the engine and remove the spark plug wire before attempting to remove any obstruction caught or jammed in the blade or before removing and installing the blade. Do not attempt to touch or stop the blade when it is rotating. A coasting blade can cause injury while it continues to spin after the engine is stopped or throttle trigger released. Maintain proper control until the blade has completely stopped rotating. replace any blade that has been damaged. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts. WARNING Never attach or adjust any attachment while power head is running. Failure to stop the engine may cause serious personal injury. WARNING Be certain the knob is fully tightened before operating equipment; check it periodically for tightness during use to avoid serious injury. This product is powered by a 2-stroke engine and requires pre-mixing petrol and 2-stroke lubricant. Premix unleaded petrol and 2-stroke engine lubricant in a clean container approved for petrol. This engine is certified to operate on unleaded petrol intended for automotive use with an octane rating of 87 ([R + M] / 2) or higher. Do not use any type of pre-mixed petrol / lubricant from fuel service stations, this includes the pre-mixed petrol / lubricant intended for use in mopeds, motorcycles, etc. Mix the fuel thoroughly and also each time before fueling. Do not mix quantities larger than usable in a 30 day period. [. . . ] Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black lubricant residue dripping from the muffler. Make sure all guards, straps, deflectors and handles are properly and securely attached to avoid the risk of personal injury. This engine uses a Champion RCJ-6Y or equivalent spark plug with 0. Drain all fuel from tank into a container approved for fuel. [. . . ]