User manual RYOBI 705R725R

[. . . ] 705r ­ 725r 2-Cycle Gas Trimmer OPERATOR'S MANUAL 705r Trimme r Plu s® FOR QUESTIONS, CALL 1-800-345-8746 in U. S. or 1-800-265-6778 in CANADA www. ryobi. com IMPORTANT MANUAL DO NOT THROW AWAY INTRODUCTION THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. [. . . ] While firmly holding the upper shaft housing, pull the add-on straight out of the Click-Link® (Fig. 13). Basic Trimming or Using Other RYOBI Add-Ons: Lock the release button in the Primary Hole in the Click-Link® (Fig. 13). Edging with the Cutting Attachment Lock the release button in the 90° Edging Hole or the 180° Edging Hole in the Click-Link® (Fig. 14). 13 OPERATING INSTRUCTIONS HOLDING THE TRIMMER WARNING: Always wear eye, hearing, foot and body protection to reduce the risk of injury when operating this unit. Before operating the unit, stand in the operating position (Figs. Check for the following: · The operator is wearing eye protection and proper clothing. · The right arm is slightly bent, and the hand is holding the shaft grip. · The left arm is straight, and the hand is holding the handle. · The cutting attachment is parallel to the ground and easily contacts the vegitation to be cut without the operator having to bend over. 17 Each time the head is bumped, about 1 in. (25. 4 mm. ) of trimming line is released. A blade in the cutting attachment shield will cut the line to the proper length if excess line is released. For best results, tap the Bump HeadTM on bare ground or hard soil. If line release is attempted in tall grass, the engine may stall. Always keep the trimming line fully extended. Line release becomes more difficult as the cutting line becomes shorter. 15 Model 725r NOTE: Do not rest the Bump HeadTM on the ground. CAUTION: Do not remove or alter the line cutting blade assembly. Excessive line length will make the clutch overheat. This may lead to serious personal injury or damage to the unit. Some line breakage will occur from: · Entanglement with foreign matter · Normal line fatigue · Attempting to cut thick, stalky weeds · Forcing the line into objects such as walls or fence posts Fig. 16 ADJUSTING TRIMMING LINE LENGTH The Bump HeadTM cutting attachment allows you to release trimming line without stopping the engine. [. . . ] The RYOBI Product including any defective part must be returned to an authorized service dealer within the warranty period. The expense of delivering the RYOBI Product to the dealer for warranty work and the expense of returning it back to the owner after repair or replacement will be paid for by the owner. RYOBI's responsibility in respect to claims is limited to making the required repairs or replacements and no claim of breach of warranty shall be cause for cancellation or rescission of the contract of sale of any RYOBI Product. Proof of purchase will be required by the dealer to substantiate any warranty claim. [. . . ]