User manual RYOBI 740R-SERIALS-810204484-THRU-

[. . . ] Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. [. . . ] Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that can not be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Visitors should wear 2 OPERATION APPLICATIONS (Use only for the purposes listed below. ) Drilling wood, materials and resin boards. Drilling concrete (impact drilling only). Drilling metal: steel, brass, aluminum sheets, stainless steel & pipe. SWITCH See Figure 1 & 3. This tool can be started and stopped by squeezing and releasing the trigger switch (1). The speed can be adjusted in either gear by controlling the force applied to the trigger. The maximum speed of the drill may be set at different speeds by adjusting the variable speed selector (4). For continuous operation, press the lock-on button (5) while squeezing the trigger. Squeeze the trigger again to release the lock. CHANGING THE ROTATION DIRECTION See Figure 2. To change the direction of rotation, stop the tool and push the forward / reverse selector (2). When the forward selector is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. English OPERATION When the reverse selector is pushed in, the bit rotates counterclockwise. In deep bore holes the drill bit should be pulled out occasionally in order to remove the debris from the drill and hole. AUXILIARY HANDLE AND DEPTH GAUGE MOUNTING AND REMOVING THE BIT See Figure 4. See Figure 6. Auxiliary handle The auxiliary handle (8) can be rotated 360º. Loosen the handle grip by turning in direction (15), and tighten it at an easy to use position by turning the grip in direction (14). Depth gauge Holes of a fixed depth can be accurately bored by using the depth gauge (7). [. . . ] When the switch is in position "2" the tool is in the high gear. English OPERATION BUBBLE LEVEL See Figure 1. A bubble vial is located on the top of the motor housing to help keep the drill bit level during use. This ensures maximum accuracy in drilling. Recommendation: Always be supplied via a residual current device with a rated residual current of 30 mA or less. [. . . ]