User manual RYOBI 750R-SERIALS-611000001-THRU-

[. . . ] This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. [. . . ] Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating power tools in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. English hands of untrained users. Drilling concrete (impact drilling only). Drilling metal: steel, brass, aluminum sheets, stainless steel & pipe. This tool can be started and stopped by squeezing and releasing the trigger switch. The speed can be adjusted by controlling the force applied to the trigger. The maximum speed of the drill may be set at different speeds by adjusting the variable speed selector. For continuous operation, press the lock-on button while squeezing the trigger. Squeeze the trigger again to release the lock. CHANGING THE ROTATION DIRECTION See Figure 2. To change the direction of rotation, stop the tool and push the forward / reverse selector. When the forward selector is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. English When the reverse selector is pushed in, the bit rotates counterclockwise. MOUNTING AND REMOVING THE BIT See Figure 4. [. . . ] The depth of the hole will be the distance from the end of the bit to the end of the depth gauge. By turning the handle grip in direction, the depth gauge can be released and the depth adjusted. After adjusting the depth, fix the depth gauge again by turning the handle grip in direction. Recommendation: Always be supplied via a residual current device with a rated residual current of 30 mA or less. " and " LIVE TOOL INDICATOR This tool features a live tool indicator which illuminates as soon as the tool is connected to the supply. [. . . ]