User manual RYOBI 800W ANGLE GRINDER KIT 125MM EAG8012C

[. . . ] WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Do not attempt to operate this tool until you have read thoroughly and understood completely, safety rules, etc. Failure to comply can result in accidents involving fire, electric shock or serious personal injury. [. . . ] Check current features and specifications with your retailer. 5 4 12 3 1 2 9 Fig. Grinding wheel Tool - less wheel guard Auxiliary handle Spindle lock button Switch Inner disc flange 7. PowerLightTM NOISE BUILD-UP Noise (sound pressure level) in the workplace can exceed 85 dB (A). In this case, sound insulation and hearing protection measures must be taken by the operator. AUXILIARY HANDLE The auxiliary side handle on this angle grinder houses the wheel lock nut wrench. To remove the wheel lock nut wrench from the auxiliary handle, pull it out by the two lugs on the wrench. When finished with the wrench, slide it back in to the auxiliary handle with the lugs facing out. INSTRUCTIONS FOR SAFE HANDLING Make sure that the tool is only connected to the voltage marked on the name plate. Never use the tool if its cover or any bolts are missing. If the cover or bolts have been removed, replace them prior to use. Maintain all parts in good working order. Always secure tools when working in elevated positions. Never touch the blade, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES : The use of accessories or attachments other than those recommended in this manual might present a hazard. REPLACEMENT PARTS : When servicing use only identical replacement parts. Do not use wheels having a maximum permissible speed below 12100 RPM. SWITCH (Fig. 2) This tool is started and stopped by sliding and releasing the switch (5). For the convenience of continuous operation, slide the switch along and it will be locked. To release the lock, press the rear end of the switch WARNING!To ensure safety and reliability, all repairs should be performed by an AUTHORIZED SERVICE CENTRE or other QUALIFIED SERVICE ORGANIZATION. ANGLE GRINDER SAFETY PRECAUTIONS Check that the speed marked on the grinding wheel is equal to or greater than the rated speed of the tool. Ensure that the dimensions of the grinding wheel are compatible with the tool and that the wheel fits the spindle. Grinding wheels must be stored in a dry place. Grinding wheels must not be used for any operation other than grinding. [. . . ] DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS IN MOTION. ALWAYS DISCONNECT THE POWER CORD FROM THE POWER SUPPLY BEFORE CHANGING REMOVABLE OR CONSUMABLE PARTS (DIAMOND BLADE, GRINDING WHEEL ETC. ), LUBRICATING OR WORKING ON THE UNIT. STANDARD ACCESSORIES Aux. handle, Wrench A grinding wheel is included in the standard accessories for some countries. APPLICATIONS (Use only for the purposes listed below. ) Grinding Cutting - for Diamond blade only (optional). SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 3 RYOBI TECHNOLOGIES AUSTRALIA PTY. 98 002 277 509 SYDNEY: 359-361 Horsley Road, Milperra, N. S. W. [. . . ]