User manual RYOBI 865R-SERIALS-401000001-THRU-

[. . . ] Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. Make sure the raised rib on the battery pack aligns with the groove in the battery port. Press down on the battery pack to be sure contacts on the battery pack engage properly. Reattach the cap by placing it over the battery pack and twisting the arrow to the LOCK icon, making sure the cap is secure. [. . . ] Do not attempt to use this tool if the battery cap is not closed and locked. With the screwdriver held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for forward motion. the direction is reversed when the selector is to the right of the switch trigger. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use. CAUTION To prevent gear damage, always allow the collet to come to a complete stop before changing the direction of rotation. To stop the screwdriver, release the switch trigger and allowthe collet to come to a complete stop. NOTE: The screwdriver will not run unless the direction of rotation selector is pushed fully to the left or right. This screwdriver is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using. There are twenty-four torque indicator settings located on the front of the screwdriver. WARNING Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. Safety Alert V min-1 Volts Revolutions or reciprocations per minute Direct current CE Conformity Please read the instructions carefully before starting the machine. Recycle unwanted Waste electrical products should not be disposed of with household waste. Pour retirer le pack batterie, tournez le couvercle pour l'ouvrir puis sortez le pack batterie de son logement. Use a opção de velocidade HI (alta) para fazer furos e use a opção de velocidade LO (baixa) para aparafusar. În cazul în care efectua i opera ii în locuri în care colierul de strângere poate intra în contact cu cabluri ascunse sau cu propriul cablu de alimentare, ine i unealta electric de suprafe ele de prindere izolate. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. [. . . ] In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. I händelse av felaktig funktion medan garantin är i kraft skall produkten sändas UTAN ATT DEMONTERAS tillsammans med inköpsbeviset till leverantören eller till närmaste servicecenter som auktoriserats av Ryobi. WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ]