User manual RYOBI 960R-SERIALS411088141-THRU-

[. . . ] 4 19 1 2 18 10 9 17 11 Fig. 10 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications English GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. [. . . ] Spade Bit (mm) Weight - not incl. battery pack (KG) MODEL BATTERY PACK (not included) BPL-1820 BPL-1815 ABP1801 960R-SERIALS411088141-THRU- BATTERY PACK (not included) ABP1801 18 V 2-13 Variable speed 0 - 440 min-1 0 - 1600 min-1 24 Positions 37. 5 32 1. 28 CHARGER (not included) BCL-1800 BCS618 CHARGER (not included) ACR-180 BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. To reset the battery and tool, release the trigger and resume normal operation. NOTE: To prevent further shut down of the battery, avoid forcing the tool. If releasing the trigger does not reset the battery and tool, the battery pack is depleted. If depleted, the battery pack will begin charging when placed on the lithium-ion charger. TO INSTALL BATTERY PACK See Figure 2. See Figure 3. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for forward drilling. The drilling direction is reversed when the selector is to the right of the switch trigger. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use. CAUTION: To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation. To stop the drill, release the switch trigger and allow the chuck to come to a complete stop. [. . . ] 4 WARNING Do not hold the chuck with one hand and use the power of the drill to tighten the chuck jaws on the drill bit. The chuck body could slip in your hand, or your hand could slip and come in contact with the rotating drill bit. This could cause an accident resulting in serious personal injury. TWO-SPEED GEAR TRAIN (HI-LO) See Figure 5. The drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. [. . . ]