User manual RYOBI AG162 NM SCHEMA ELECTRIC

[. . . ] These instructions contain important information to easily and safely install and operate the car sound system. ⷠRead these instructions carefully and completely before using the car sound system. ⷠKeep the instructions at a location so that they are always accessible to all users. ⷠAlways pass on the car sound system to third parties together with these instructions. [. . . ] Enter the PIN displayed by the car sound system. The display may show "PAIRED", followed by "CONNECTED", as soon as the car sound system and the cell phone are paired and connected. notes: · If no connection can be established, the display briefly shows "CONNECT FAILED". ⷠIf the telephone connected last cannot be located after switching on the car sound system, the car sound system attempts to connect one of the other paired telephones. If none of the telephones can be located, the display briefly shows "NO DEVICE". Pairing and connecting a Bluetooth® streaming device Note: If a connection with a streaming device currently exists, this connection is automatically disconnected if you pair and connect another streaming device. U In the Bluetooth® menu, select the "PAIRING" menu item. U Press the button 7 to pair a streaming device. The display shows the currently stored PIN (default "1234"). If required, enter the PIN of the streaming device: u Turn the volume control 4 to select a digit for the respective position. U Press the or button 7 to reach the next or previous position. notes: · During the call, you can adjust the volume with the volume control 4 or mute the device with a short press of the On/Off button 3. ⷠYou can preset the hands-free volume in the user menu (see the chapter "User settings", section "Making settings in the "VOLUME" menu", menu item "TEL VOLUME"). Making a call u In the Bluetooth® menu, select the "DIAL NEW NUMBER" menu item. U Press the button 7 to open the entry menu. You can now enter a phone number with up to 20 digits: u Turn the volume control 4 to select a digit for the respective position. U Press the or button 7 to reach the next or previous position. notes: · You can also reach the next position by pressing the ON/Off button 3. ⷠWhile entering the phone number, you cannot change the volume or mute the car sound system. U Press the button < to call the number entered. "CALLING" and the dialed number are alternately shown on the display. As soon as your calling party answers the call, the display shows "CALL" and the time of the current phone call. [. . . ] U Press the button 7 to open the submenu. U Turn the volume control 4 to perform the setting. NORMSET Restoring the original factory settings of the car sound system. U Press the button 7 to open the submenu. [. . . ]