User manual RYOBI AQTT 02 SCHEMA

[. . . ] WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Do not attempt to operate this tool until you have read thoroughly and understood completely safety rules, etc. Failure to comply can result in accidents involving fire, electric shock or serious personal injury. [. . . ] Use of these devices can reduce dust related hazards. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that can not be controlled with the switch is dangerous andmust be repaired. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or bindling of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Do not continue to use worn or torn abrasive belts. Clamp the work piece if it does not remain stationary due to its own weight. Turn the tool on before applying it to the work piece. Turn the tool off after it has been lifted away from the work piece. Input Power No load speed Belt size Net weight 230 V~50 Hz 800 W 150-300 m/min 76 x 533 mm 3. This tool is started and stopped by squeezing and releasing the trigger (8). For continous operation, press the lock-on button (7) while trigger is being squeezed. Squeeze trigger again to release the lock. The belt speed can be freely adjusted from 150 to 300 m/min by turning the variable speed control (12). (1= lowest speed / 6 = highest speed ) Be sure to check the nameplate on the product, because the voltage is subject to change depending on the area in which the product is to be used. When sanding wood, the dust bag (5) should be used. [. . . ] Release the front handle release button to allow the handle to lock in to the selected. Put the sanding frame on the belt sander at attach four slot into slot holder (15). By turning the adjustment bolt clockwise, the sanding frame will rise and can be taken out. If turning counterclockwise, it will down and the depth will be added. [. . . ]