User manual RYOBI ATLANTIS 140 SCHEMA 1

[. . . ] Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Ensure the switch is in the off position before plugging in. [. . . ] Use of the power tool for operations different from intened could result in a hazardous situation. 5) BATTERY TOOL USE AND CARE a) Ensure the switch is in the off position before inserting battery pack. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. C) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. D) When battery pack is not in use, keep it away from other metal abjects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. shorting the battery terminals together may cause burns or a fire. E) Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs , flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Refer to them frequently and use them to instruct others who may use this unit. If you loan someone this unit, loan them these instructions also. Note: Batteries will not reach full charge the first time they are charged. Allow several cycles for them to fully charge. Depress latches to release battery pack 8. Charge battery pack only with the charger provided. Make sure power supply is normal house voltage, 230 volts, 50 Hz, AC only. Make sure charger plug and input jack are properly connected. Press down on battery pack to be sure contacts on battery pack engage properly with contacts in charger. When properly connected, red light will turn on. The LED indicator, which is located on the charging stand, will light up when charger is properly connected to power supply. [. . . ] WARNING Do not hold chuck body with one hand and use power of the drill to tighten chuck jaws on drill bit. Chuck body could slip in your hand or your hand could slip and come in contact with rotating drill bit. This could cause an accident resulting in serious personal injury. The switch trigger can be locked in the OFF position. [. . . ]