User manual RYOBI BDP1200 SCHEMA

[. . . ] 3-4 n Specific Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 n Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 n Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 n Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you loan someone this tool, loan them these instructions also. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: · lead from lead-based paints, · crystalline silica from bricks and cement and other masonry products, and · arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. 4 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL V A Hz W min Volts Amperes Hertz Watt Minutes NAME Voltage Current DESIGNATION/EXPLANATION Frequency (cycles per second) Power Time Type of current Type or a characteristic of current Rotational speed, at no load Double-insulated construction Revolutions, strokes, surface speed, orbits etc. , per minute Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read and understand operator's manual before using this product. Always wear safety goggles or safety glasses with side shields, or a full face shield when operating this product. Failure to keep your hands away from the blade will result in serious personal injury. Failure to keep your hands away from the blade will result in serious personal injury. Failure to keep your hands away from the blade will result in serious personal injury. It has been designed so that flush sanding on three sides of the sander is possible. ON/OFF SWITCH This tool is equipped with a simple switch control. To turn the sander "ON, " slide the switch to the left ( | ). Slide the switch to the right ( O ) to turn the sander "OFF. " PAPER CLAMPS Your sander has quick action paper clamps. This makes changing or replacing sandpaper fast and easy. PAPER PUNCH DUST BAG Your sander has a built-in dust collection system that collects dust through punched holes in the sandpaper and cushion. Dustless sanding occurs when you use the paper punch to punch holes in the sandpaper prior to sanding. GRIPZONETM OVERMOLD TECHNOLOGY The sander features GripzoneTM overmold technology for improved comfort with a positive grip. 8 ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. PACKING LIST 1/4 Sheet Orbital Sander Sandpaper (3 sheets) Dust Bag Assembly Paper Punch Operator's Manual Warranty Registration Card WARNING: Do not connect to power supply until assembly is complete. [. . . ] This will permit the air to flow through the bag better. To empty the dust bag: n Unplug the sander. n Remove the dust bag from the sander and shake out dust. n For a more thorough cleaning of the dust bag, remove dust bag from the frame and shake out dust. [. . . ]