User manual RYOBI BGH615

[. . . ] OPERATOR'S MANUAL BENCH GRINDER MODELS BGH615/BGH625/BGH825 MODEL BGH615 MODEL BGH625 MODEL BGH825 THANK YOU FOR BUYING A RYOBI BENCH GRINDER. Your new Bench Grinder has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new machine. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. [. . . ] 2 n Lock Washers (5 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Washers (5 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n n n n Washers (8 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Phillips Screws (5 mm x 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hex Bolts (8 mm x 14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Adjustment Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Hex Nuts (5 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Washers (5 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Operator's Manual LOOSE PARTS LIST ­ BGH825 The following items are included with your Bench Grinder: n Shield Rods ­ one left, one right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Shield Rod Brackets with Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Safety Shields. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Spark Deflectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Work Rests ­ one left, one right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n Lock Washers (5 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n n n n n n Washers (5 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Washers (8 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Phillips Screws (5 mm x 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hex Bolts (8 mm x 14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hex Bolts (5 mm x 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operator's Manual TOOLS NEEDED The following tools (not included) are needed for assembly and alignment: 7 MM, 10 MM, AND 12 MM COMBINATION WRENCH PHILLIPS SCREWDRIVER ADJUSTABLE WRENCH Fig. 2 Page 7 FEATURES ­ BGH615 KNOW YOUR BENCH GRINDER See Figure 3a. Before attempting to use your new tool, familiarize yourself with all operating features and safety requirements. [. . . ] To install the new bulb, gently push the bulb into the socket and turn clockwise. Note: To avoid the risk of fire, never use a bulb with a wattage higher than 40. WHEEL DRESSER For models BGH625 and BGH825 ONLY. Dressing a wheel is done to renew sharpness or to true up the face of the wheel. Set the work rest of the bench grinder at a slight angle and brace the wheel dresser against it. [. . . ]