User manual RYOBI CBD-1202

[. . . ] Its large storage capacity accommodates a wide variety of tools and accessories. [. . . ] Dividers can be raised and fastened into place whenever needed, then unfastened and lowered when a larger storage area is desired. A zippered cover helps protect your tools from dust, debris, and moisture. When not needed, the cover can be rolled backward and stored in the pocket located on the back side of the toolbox. Before using the toolbox for the first time, some minor assembly is required. ASSEMBLING THE TOOLBOX: See Figures 1 - 8. To store the cover, simply unzip completely, then roll the cover backward and insert into the pocket located on the back of the toolbox as shown. The hook-and-loop fasteners located on the inside of the pocket and on the cover itself allow the cover to be secured inside the pocket. TOOLBOX COVER HOOKAND-LOOP FASTENERS POCKET SHOULDER STRAP Fig. 8 n To carry the toolbox when the cover is zipped closed, simply lift the handle access flap as shown below and grasp the toolbox handle. HANDLE ACCESS FLAP WARNING: To prevent possible serious injury, do not sit or stand on the toolbox. WARNING To avoid possible back or lifting injury, use proper lifting techniques and do not attempt to lift an excessive amount. WARNING If carrying a loose battery pack, keep it away from paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. [. . . ] Shorting the battery terminals together may cause sparks, burns, or a fire. Fig. [. . . ]