User manual RYOBI CDI1803M

[. . . ] Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Never carry the charger by the cord or yank it to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges. [. . . ] Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. If this accidentally occurs, flush with water. If liquid contacts eyes additionally, seek medical help. Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury. wARNING Batteries vent hydrogen gas and can explode in the presence of a source of ignition , such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. Model Voltage Chuck Switch No load speed (drill mode): - Lo speed - Hi speed - Super-Hi speed No load speed (impact mode): - Lo speed - Hi speed - Super-Hi speed Max. Battery pack Battery pack (not included): Charger (not included) CDI-1803M 18 V 13 mm Variable speed 0 - 370 min-1 0 - 750 min-1 0 - 2200 min-1 0 - 5920 min-1 0 - 12000 min-1 0 - 35200 min-1 55 Nm 3 kg BPP-1817M/BPP-1815M BC-1800/BC-1815-S Lock switch trigger on your drill by placing the direction of rotation selector in center position. Align raised rib on battery pack with groove inside drill. Make sure the latches on battery pack snap in place and battery pack is secured in drill before beginning operation. Lock switch trigger on your drill by placing the direction of rotation selector in center position. Locate latches of battery pack and depress to release battery pack from your drill. Keyless chuck Switch trigger Direction of rotation selector (Forward/Reverse) Screwdriver bits Battery pack (not included) Depth gauge Rod Auxiliary handle Latches Depress latches to release battery pack To Tighten To Loosen 6 Lock the trigger switch by placing the rotation selector in the center position. When the selector is in center position, the switch trigger is locked. To stop, release switch trigger and allow the chuck to come to a complete stop. eLECTRIC BRAKE This drill has an electric brake. When the trigger switch is released, the chuck stops turning. When the brake is functioning properly, sparks will be visible through the vent slots on the housing. [. . . ] Abusive practices can damage tool as well as workpiece. WARNING Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]