User manual RYOBI CHP12011BP SCHEMA

[. . . ] torque for hard screwdriving application according to ISO 5393: 7 Nm (2236) / 9 Nm (CHP12011BP) SAFETY GENERAL SAFETY INSTRUCTIONS WARNING!Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. [. . . ] Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Ensure the switch is in the off position before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 5 f) Keep cutting tools sharp and clean. GELUID/VIBRATIE Gemeten volgens EN 60 745 bedraagt het geluidsdrukniveau van deze machine < 70 dB(A) (standaard deviatie: 3 dB) en de vibratie < 2, 5 m/s2 (hand-arm methode; onzekerheid K = 1, 5 m/s2). Technisch dossier bij: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. S CE KONFORMITETSFRKLARING Vi intygar och ansvarar fr, att denna produkt verensstmmer med fljande norm och dokument: EN 60 335, EN 60 745, EN 55 014, enl. bestmmelser och riktlinjema 2006/95/EG, 2004/108/EG, 98/37/EG (till 28. 12. 2009), 2006/42/EG (from 29. 12. 2009). LJUD/VIBRATION Ljudtrycksnivn som uppmtts enligt EN 60 745 r p denna maskin < 70 dB(A) (standard deviation: 3 dB) och vibration < 2, 5 m/s2 (hand-arm metod; onoggrannhet K = 1, 5 m/s2). Teknisk tillverkningsdokumentation finns hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. DK CE KONFORMITETSERKLRING Vi erklrer under almindeligt ansvar, at dette produkt er i overensstemmelse med flgende normer eller normative dokumenter: EN 60 335, EN 60 745, EN 55 014, i henhold til bestemmelserne i direktiverne 2006/95/EF, 2004/108/EF, 98/37/EF (indtil 28. 12. 2009), 2006/42/EF (fra 29. 12. 2009). STJ/VIBRATION Mles efter EN 60 745 er lydtrykniveau af dette vrktj < 70 dB(A) (standard deviation: 3 dB) og vibrationsniveauet < 2, 5 m/s2 (hnd-arm metoden; usikkerhed K = 1, 5 m/s2). Teknisk dossier hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. N CE SAMSVARSERKLRING Vi erklrer at det er under vrt ansvar at dette produkt er i samsvar med flgende standarder eller standard- dokumenter: EN 60 335, EN 60 745, EN 55 014, i samsvar med reguleringer 2006/95/EF, 2004/108/EF, 98/37/EF (frem til 28. 12. 2009), 2006/42/EF (fra 29. 12. 2009). STY/VIBRASJON Mlt iflge EN 60 745 er lydtrykknivet av dette verktyet < 70 dB(A) (standard deviasjon: 3 dB) og vibrasjonsnivet < 2, 5 m/s2 (hnd-arm metode; usikkerhet K = 1, 5 m/s2). Tekniske underlag hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. FIN CE TODISTUS STANDARDINMUKAISUUDESTA Todistamme tten ja vastaamme yksin siit, ett tm tuote en allalueteltujen standardien ja standardoimisasiakirjojen vaatimusten mukainen EN 60 335, EN 60 745, EN 55 014, seuraavien sntjen mukaisesti 2006/95/EY, 2004/108/EY, 98/37/EY (28. 12. 2009 asti), 2006/42/EY (29. 12. 2009 alkaen). MELU/TRIN Mitattuna EN 60 745 mukaan tykalun melutaso on < 70 dB(A) (keskihajonta: 3 dB) ja trinn voimakkuus < 2, 5 m/s2 (ksi-ksivarsi metodi; epvarmuus K = 1, 5 m/s2). Tekninen tiedosto kohdasta: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. E CE DECLARACION DE CONFORMIDAD Declaramos bajo nuestra sola responsabilidad que este producto est en conformidad con las normas o documentos normalizados siguientes: EN 60 335, EN 60 745, EN 55 014, de acuerdo con las regulaciones 2006/95/CE, 2004/108/CE, 98/37/CE (hasta el 28. 12. 2009), 2006/42/CE (a partir del 29. 12. 2009). [. . . ] HAASU/WIBRACJE Pomiarw dokonano zgodnie z norm EN 60 745 cinienie akustyczne narzdzia wynosi < 70 dB(A) (poziom odchylenie: 3 dB), za wibracje < 2, 5 m/s2 (metoda do-rka; bd pomiaru K = 1, 5 m/s2). Dokumentacja techniczna: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. RU , : EN 60 335, EN 60 745, EN 55 014, 2006/95/EC, 2004/108/EC, 98/37/EC ( 28. 12. 2009), 2006/42/EC ( 29. 12. 2009). / co o EN 60 745 < 70 (A) ( : 3 dB), - < 2, 5 /2 ( ; K = 1, 5 /2). : RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. [. . . ]