User manual RYOBI CPD1800 ACCESSOIRES

[. . . ] VC180WD Always mention the above number when communicating with us regarding this replacement filter. We have engineered and manufactured your new replacement filter to Ryobi's high standard for dependability, ease of operation, and operator safety. When properly cared for, the replacement filter will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand this operator's manual and the operator's manual for your Hand Vac. [. . . ] Thank you again for buying a Ryobi replacement filter . SAVE THIS MANUAL FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: REPLACING FILTER See Figures 1 & 2. READ ALL INSTRUCTIONS BEFORE USING HAND VAC WARNING: Never use your hand vac without dust bowl, filter, and filter rack properly in place. WARNING: To reduce the risk of fire, electric shock, or injury, read and understand all instructions in this operator's manual and the operator's manual for the hand vac before using hand vac, changing attachments, filters, or making adjustments. Close attention is necessary when used by or near children. I Keep hair, loose clothing , fingers, and all parts of the body away from openings and moving parts. I A cordless hand vac does not have to be plugged into an electrical outlet, therefore it is always in operating condition. Be aware of possible hazards when using your hand vac or when changing accessories. I DO NOT PLACE BATTERY PACK NEAR FIRE OR HEAT. I Twist the filter to unlock from the filter rack tabs and remove the filter. I Empty filter rack and dust bowl; wash if necessary. Make sure filter rack and dust bowl are completely dry before reattaching to hand vac. I With arrow on filter pointed up, place new filter in the filter rack ensuring the slots in the filter are aligned with the tabs on the filter rack. I Place the assembled filter rack and filter into the dust bowl. I Position the two sections as shown in Figure 4. [. . . ] I Place the assembled filter rack and filter into the dust bowl. I Position the two sections as shown in Figure 4. [. . . ]