User manual RYOBI CW-1801-165

[. . . ] Your safety is involved. RULES FOR SAFE OPERATION Safe operation of this accessory requires that you read and understand this operator's manual, the operator's manual for the table saw and all labels affixed to the tool. DO NOT USE THIS PRODUCT WITH OTHER EQUIPMENT or for other purposes. ALWAYS DISCONNECT THE SAW FROM THE POWER SUPPLY BEFORE ASSEMBLING THIS KIT. [. . . ] BEFORE MAKING A CUT, BE SURE ALL ADJUSTMENTS ARE SECURE. Refer to them frequently and use them to instruct other users. If you loan someone this product, also loan these instructions. READ ALL INSTRUCTIONS KNOW YOUR ACCESSORY. Read the operator's manual carefully. Learn the product's applications and limitations as well as the specific potential hazards related to this product. Cluttered work areas and work benches invite accidents. DO NOT leave tools or pieces of wood on the saw while operating. ALWAYS WEAR SAFETY GLASSES WITH SIDE SHIELDS. Everyday eyeglasses have only impactresistant lenses; they are NOT safety glasses. Tighten arbor nut and blade washer securely. Place dado insert on the table saw as shown in figure 1. Securely tighten using screws provided. DADO INSERT SCREWS TABLE TOP WARNING: Never stand directly in line with the blade or allow hands to come closer than 3 in. Failure to heed this warning can result in serious personal injury. 1 USING A DADO INSERT Make sure the wood is not touching the blade. Plug in the saw, insert the switch key, and turn the saw on. Let the saw build up to full speed before feeding the workpiece into the blade. Always use pushsticks or pushblocks with dado cuts. [. . . ] See Figure 2. - PUSHSTICK WARNING: Always use pushsticks or pushblocks when making nonthrough cuts to avoid the risk of serious injury. When the work is complete, turn the saw off, remove the switch key, and unplug the saw. Lower the blade below the table surface. [. . . ]