User manual RYOBI ED382NP SCHEMA ELECTRIC

[. . . ] 40 Opening the "Settings" menu . 45 Faults in the water intake/water drain . 46 General problems with the dishwasher . 57 Cleaning the drain pump and non-return valve . [. . . ] If a program has already started and you wish to change it: ^ Press the "Start / Stop" button for at least one second. ^ Select and start the desired program. , Water in the dishwasher is hot. Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place. 37 Additional options Intensive lower basket The "Intensive lower basket" option allows you to wash heavily soiled items in the lower basket while washing more delicate items in the upper basket. Cleaning performance in the lower basket is intensified in programs where this function is available. Depending on the program, this can mean that the running time varies slightly. ^ Press the K button to turn the dishwasher on. The "Start / Stop" indicator light flashes. ^ Press the "Intensive lower basket" button. ^ Press the "Start / Stop" button. The "Start / Stop" indicator light comes on. If, after you have set the delay start time, you do not press the Start / Stop button within a few seconds, the display will revert to showing the program duration. You will have to enter the delay start time again. The time will count down to the program start in 1-minute steps. Once the delay start time has elapsed, the selected program starts. The display shows the remaining time, the indicator "Delay start" goes out and the "Start / Stop" indicator light comes on. , To prevent children from coming into contact with the detergent: Only add detergent just before starting the program, i. before you press the Start / Stop button, and lock the door with the child safety lock. Starting a program before the Delay start has elapsed: A program can be started before the Delay start time has elapsed. ^ Press the "Start / Stop" button for at least one second. The "Delay start" indicator light goes out and the "Start / Stop" indicator light flashes. ^ Press the "Start / Stop" button again. [. . . ] See "Frequently Asked Questions" for more information. ­ If the water pressure is higher than shown, a pressure reducing valve must be used. Ensure that the water connection is secure after the first use. , Installation, repairs and other work , Do not drink water from the dishwasher! ­ The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot (max. [. . . ]