User manual RYOBI EID600RS SCHEMA

[. . . ] Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool. [. . . ] g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. N'utilisez pas de fiches d'adaptateur avec des appareils avec mise la terre. Les fiches non modifies et les prises de courant appropries rduisent le risque de choc lectrique. b) Evitez le contact physique avec des surfaces mises la terre telles que tuyaux, radiateurs, fours et rfrigrateurs. Il y a un risque lev de choc lectrique au cas o votre corps serait reli la terre. c) N'exposez pas l'outil lectroportatif la pluie ou l'humidit. La pntration d'eau dans un outil lectroportatif augmente le risque d'un choc lectrique. ENVIRONMENT Do not dispose of electric tools, accessories and packaging together with household waste material (only for EU countries) - in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility - symbol 8 will remind you of this when the need for disposing occurs F Perceuse/visseuse sans fil INTRODUCTION 2311/EID600RS/2511 Cet outil est conu pour le perage dans le bois, le mtal, la cramique et les matires plastiques; les outils avec rglage lectronique de la vitesse et rotation droite/ gauche sont galement appropis pour le vissage et le filetage Lisez et conservez ce manuel d'instructions 3 11 GB CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60 335, EN 60 745, EN 55 014, in accordance with the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until Dec. NOISE/VIBRATION Measured in accordance with EN 60 745 the sound pressure level of this tool is < 70 dB(A) (standard deviation: 3 dB), and the vibration m/s2 (hand-arm method). Technical file at: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. F CE DCLARATION DE CONFORMIT Nous dclarons sous notre propre responsabilit que ce produit est en conformit avec les normes ou documents normaliss suivants: EN 60 335, EN 60 745, EN 55 014, conforme aux rglementations 2006/95/CE, 2004/108/CE, 98/37/CE (jusqu'au 28. 12. 2009), 2006/42/CE ( partir du 29. 12. 2009). BRUIT/VIBRATION Mesur selon EN 60 745 le niveau de la pression sonore de cet outil est < 70 dB(A) (dviation standard: 3 dB), et la vibration m/s2 (mthode main-bras). Dossier technique auprs de: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. D CE KONFORMITTSERKLRUNG Wir erklren in alleiniger Verantwortung, da dieses Produkt mit den folgenden Normen oder normativen Dokumenten bereinstimmt: EN 60 335, EN 60 745, EN 55 014, gem den Bestimmungen der Richtlinien 2006/95/EG, 2004/108/EG, 98/37/EG (bis 28. 12. 2009), 2006/42/EG (ab 29. 12. 2009). GERUSCH/VIBRATION Gemessen gem EN 60 745 betrgt der Schalldruckpegel dieses Gertes < 70 dB(A) (Standard- abweichung: 3 dB), und die Vibration m/s2 (Hand-Arm Methode). [. . . ] HAASU/WIBRACJE Pomiarw dokonano zgodnie z norm EN 60 745 cinienie akustyczne narzdzia wynosi < 70 dB(A) (poziom odchylenie: 3 dB), za wibracje m/s2 (metoda do-rka). Dokumentacja techniczna: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. RU , : EN 60 335, EN 60 745, EN 55 014, 2006/95/EC, 2004/108/EC, 98/37/EC ( 28. 12. 2009), 2006/42/EC ( 29. 12. 2009). / co o EN 60 745 < 70 (A) ( : 3 dB), - /2 ( ). : RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. UA CE , : EN 60 335, EN 60 745, EN 55 014, 2006/95/EG, 2004/108/EG, 98/37/EG 28. 12. 2009 p. ), 2006/42/EG ( 29. 12. 2009 p. ). [. . . ]