Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual RYOBI EMT0005. We hope that this RYOBI EMT0005 user guide will be useful to you.
Lastmanuals help download the user guide RYOBI EMT0005.
Detailed instructions for use are in the User's Guide.
[. . . ] · When the unit is not to be used for a long period, remove the battery to avoid damage from possible battery leakage. · Not for repair, open only by authorized persons.
SPECIFICATIONS
· Class II Laser Module 650 mm. [. . . ] · To change from feet to meters, or vice versa, press the "set" and "X/=" button simultaneously.
Situations
Inaccurate readings of distance
Possible Causes
· Battery runs out of power · Measured distance is < 2' or > 50' (< 0. 6m or > 15m). · Another ultrasonic source is nearby · Measured distance is < 2' or > 50' (< 0. 6m or > 15m). The target is not a good ultrasonic reflector. thick carpet, irregular wallpaper, etc. ). · The unit points to the target obliquely. · Computation is out of the specified range.
Solutions
· Replace new battery · Make sure measured distance is within range · Remove the ultrasonic source and try again.
ERROR DISPLAY
· · · · The unit will give inaccurate readings if: The battery runs out of power The distance to be measured is less than 2' (0. 6m) or There is another ultrasonic source in the vicinity. "ERROR" will be displayed if the reflected ultrasonic pulses are not strong enough. This may happen when: -The measuring distance is out of working range. -The target is not a good ultrasonic reflector (e. g. thick carpet, irregular wall paper, etc. ) -The unit of the multiplication result is higher than cube.
Class II Laser Product Max. Power Output < 1mw Wavelength: 640-670 nm Complies with CFR 21 parts 1040. 10 and 1040. 11
USE AS INTENDED:
The MeasureTechTM is intended for a fast, convenient distance measurement with a laser pointer which shows exactly where the measurement is being taken.
4 6
NOTE:
The MeasureTechTM measurement unit is defaulted in ft-in.
CAUTION
Avoid direct exposure to the beam. Read instructions in manual.
MEASUREMENT PROCEDURES
· Select the measurement reference. [. . . ] It is not a toy.
3
READ
983000-284 6-03
1 2 8
Finding square footage/meters and cubic footage meters
· After taking initial measurement, press the "X/=" key. Take the second measurement and again press the "X/='' key. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI EMT0005
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI EMT0005 will begin.
