User manual RYOBI ERH-600V

[. . . ] Vennligst les instruksjonene i denne bruksanvisningen før du monterer og tar i bruk maskinen. On ehdottoman välttämätöntä lukea tässä käyttöohjeessa annetut ohjeet ennen asennusta ja käyttöönottoa. Feltétlenül fontos, hogy a jelen használati útmutatóban foglalt elírásokat az összeszerelés és az üzembe helyezés ellt elolvassa !Ped montází náadí a uvedením do provozu je nutné si pecíst následující pokyny. Figyelem! [. . . ] Get into the habit of checking to see that adjusting keys and wrenches are removed from the tool before turning it on. Do not carry the plugged-in tool with a finger on the variable switch. Make sure the switch is off when plugging it in. When the tool is used outdoors, use only extension cords intended for outdoor use. Do not operate the tool when you are tired. Before further use of the tool, a guard or other part that is damaged should be carefully checked to ensure that it will operate properly and perform its intended function. Check the mounting and any other condition that may affect tool operation. A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre unless otherwise indicated elsewhere in this instructions manual. Have defective switches replaced by an Authorised Ryobi Service Centre. Do not use the tool if the switch does not turn it on and off. Warning The use of any accessory or attachment other than those recommended in this user's manual may present a risk of personal injury. Have your tools repaired by a qualified technician. This tool complies with the relevant safety rules for electric tools. To avoid all risks of injury, do not attempt to repair it yourself. Have it repaired by a qualified technician in an Authorised Ryobi Service Centre. Wherever there are facilities for fitting a dust extraction system, make sure it is properly connected and correctly used. Noise level (or sound pressure level) in the work area can exceed 85 dB(A). In this case, operators should take appropriate measures to ensure sound insulation and wear ear protectors. 5 English DESCRIPTION (FIG. Fastening sleeve Variable switch with reverse action Lock-on button Auxiliary handle Depth stop Mode selector ITEMS SUPPLIED Case Hammer drill Depth stop Auxiliary handle Make sure of your footing on ladders and scaffolding when drilling freehand. Use a line detector to locate concealed electric, water or gas lines in walls. Avoid touching live components or conductors. Wear goggles and use a dust mask on jobs generating dust. Do not use your hammer drill near flammable liquids or gases. [. . . ] Anti-clockwise rotation: Set the rotational direction switch (2) to the left position. Important When hammer drilling, you do not need to force the drill. Too much pressure will place unnecessary load on the motor. Re-sharpen or replace blunt drill bits. Speed control You can modify the speed at any time by pressing on the variable switch (2). [. . . ]