User manual RYOBI ERS-80V_

[. . . ] WARNING Do not attempt to operate this tool until you have read thoroughly and understood completely, safety rules, etc. Failure to comply can result in accidents involving fire, electric shock or serious personal injury. Save owners manual and review frequently for continuing safe operation and instructing others who may use this tool. The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. [. . . ] Keep the cord away from heat, oil and sharp edges. When tool is used outdoors, use only extension cords intended for outdoor use. Follow these directions to turn the saw on and off: To turn the saw on: Depress the switch trigger. To turn the saw off: Release the switch trigger. The variable speed feature allows the saw to operate at speeds that can be increased by rotating the dial from 1 to 6. To increase the speed (H): Turn the dial to a higher setting. To decrease the speed (L): Turn the dial to a lower setting. Selecting the correct type of blade is important in order to obtain the best performance from your saw. select the blade based on the application and on the material you wish to cut. Selecting the right blade will give you a smoother, faster cut and prolong the life of the blade. Blades with fewer teeth, 10 teeth per inch (TPI) are typically used for cutting wood, while blades with more teeth are better for cutting metal or plastic. The toolless blade change system eliminates the need for tools when changing the blade. WARNING Failure to unplug the tool could result in accidental starting causing possible serious injury. Variable speed dial Trigger switch Shoe assembly Blade clamp Blade Lock / Release level Lower the blade release lever. 2 cm can whip and should not be used for plunge cutting. Failure to heed this warning can resut in serious personal injury. WARNING Cutting into electrical wiring can cause the blade, the blade clamp, and the saw bar assembly to become electrically live. Do not touch metal parts when cutting into a wall; grasp only the insulated surfaces on the tool. [. . . ] Tilt the saw downward until the tip of the blade starts cutting the workpiece. Allow the saw to penetrate the workpiece. Det anbefales at bruge klinger med 14 tænder/tomme til at save plastic og blødt metal og klinger med 18 tænder/tomme til at save hårdt metal. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]