User manual RYOBI ESS1890C

[. . . ] It is essential that you read the instructions in this manual before mounting and operating this machine. Before using the 1/3 SHEET SANDER, please read the manual carefully, especially the safety instructions. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. [. . . ] If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Always wear safety goggles and a dust mask when sanding, especially sanding over-head. the machine is not suitable for wet sanding. Do not use sanding paper larger than needed. Extra paper extending beyond the sanding pad can also cause serious lacerations. The dust bag shall be equipped with the tool. WARNING Do not throw sanding dust on an open fire because materials in fine particle form may be explosive. WARNING A suitable breathing respirator must be worn while sanding lead paint, some woods and metal to avoid breathing the harmful/toxic dust or air. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Variation speed control "ON/OFF" switch trigger Power cord guard Dust bag assembly Sanding pad Paper clamp Live tool indicator Puncher Sandpaper Base Non-adhesive sandpaper WARNING Your sander should never be connected to power supply when you are assembling parts, making adjustments, assembling or replacing sandpaper, cleaning, or when not in use. Disconnecting sander will prevent accidental starting that could cause serious personal injury. Your sander is suitable for sanding with coarse, medium, and fine grit sandpaper. It will produce a fine scratch free finish when used to sand with the grain on wood surfaces. It has been designed so that flush corner sanding on three sides of the sander is possible. Your sander has a comfortable palm grip handle that provides maximum one-hand comfort, and reduces operator fatigue during continuous sanding operations. Your sander also has a built in dust collection that collects dust through punched holes in the sandpaper and cushion (Fig. [. . . ] Orbital motion is ideal for fast cutting action when removing old finishes, smoothing rough wood, cutting stock down to required dimensions, or for finishing surfaces to be painted. The sandpaper moves in tiny circles at a very high speed, allowing the sander to move easily. WARNING Collected sanding dust from sanding surface coatings such as polyurethanes, linseed oil, etc. Can self-ignite in your sander dust bag or elsewhere and cause fire. [. . . ]