User manual RYOBI ETMS1825

[. . . ] Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool. 1) WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. [. . . ] b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 9 c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. disconnect the plug before cleaning This RYOBI product is guaranteed in accordance with statutory/country-specific regulations; damage due to normal wear and tear, overload or improper handling will be excluded from the guarantee In case of a complaint, send the tool undismantled together with proof of purchase to your dealer or the nearest RYOBI service station (addresses as well as the service diagram of the tool are listed on www. skileurope. com) Do not dispose of electric tools, accessories and packaging together with household waste material (only for EU countries) - in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility - symbol ( will remind you of this when the need for disposing occurs 11 GB CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60 745, EN 55 014, in accordance with the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until Dec. NOISE/VIBRATION Measured in accordance with EN 60 745 the sound pressure level of this tool is 88 dB(A) and the sound power level 99 dB(A) (standard deviation: 3 dB), and the vibration m/s2 (hand-arm method). Teknisk tillverkningsdokumentation finns hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. DK CE KONFORMITETSERKLRING Vi erklrer under almindeligt ansvar, at dette produkt er i overensstemmelse med flgende normer eller normative dokumenter: EN 60 745, EN 55 014, i henhold til bestemmelserne i direktiverne 2006/95/EF, 2004/108/EF, 98/37/EF (indtil 28. 12. 2009), 2006/42/EF (fra 29. 12. 2009). STJ/VIBRATION Mles efter EN 60 745 er lydtrykniveau af dette vrktj 88 dB(A) og lydeffektniveau 99 dB(A) (standard deviation: 3 dB), og vibrationsniveauet m/s2 (hnd-arm metoden). Teknisk dossier hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. N CE SAMSVARSERKLRING Vi erklrer at det er under vrt ansvar at dette produkt er i samsvar med flgende standarder eller standard- dokumenter: EN 60 745, EN 55 014, i samsvar med reguleringer 2006/95/EF, 2004/108/EF, 98/37/EF (frem til 28. 12. 2009), 2006/42/EF (fra 29. 12. 2009). STY/VIBRASJON Mlt iflge EN 60 745 er lydtrykknivet av dette verktyet 88 dB(A) og lydstyrkenivet 99 dB(A) (standard deviasjon: 3 dB), og vibrasjonsnivet m/s2 (hnd-arm metode). Tekniske underlag hos: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. FIN CE TODISTUS STANDARDINMUKAISUUDESTA Todistamme tten ja vastaamme yksin siit, ett tm tuote en allalueteltujen standardien ja standardoimisasiakirjojen vaatimusten mukainen EN 60 745, EN 55 014, seuraavien sntjen mukaisesti 2006/95/EY, 2004/108/EY, 98/37/EY (28. 12. 2009 asti), 2006/42/EY (29. 12. 2009 alkaen). MELU/TRIN Mitattuna EN 60 745 mukaan tykalun melutaso on 88 dB(A) ja yleens tykalun nen voimakkuus on 99 dB(A) (keskihajonta: 3 dB), ja trinn voimakkuus m/s2 (ksi-ksivarsi metodi). Tekninen tiedosto kohdasta: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. E CE DECLARACION DE CONFORMIDAD Declaramos bajo nuestra sola responsabilidad que este producto est en conformidad con las normas o documentos normalizados siguientes: EN 60 745, EN 55 014, de acuerdo con las regulaciones 2006/95/CE, 2004/108/CE, 98/37/CE (hasta el 28. 12. 2009), 2006/42/CE (a partir del 29. 12. 2009). RUIDOS/VIBRACIONES Medido segn EN 60 745 el nivel de la presin acstica de esta herramienta se eleva a 88 dB(A) y el nivel de la potencia acstica 99 dB(A) (desviacin estndar: 3 dB), y la vibracin a m/s2 (mtodo brazo-mano). [. . . ] Dokumentacja techniczna: RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. RU , : EN 60 745, EN 55 014, 2006/95/EC, 2004/108/EC, 98/37/EC ( 28. 12. 2009), 2006/42/EC ( 29. 12. 2009). / co o EN 60 745 88 (A) e - 99 (A) ( : 3 dB), - /2 ( ). : RYOBI Europe BV (PT-SEU/PJE), 4825 BD Breda, NL. CE , : EN 60 745, EN 55 014, 2006/95/EG, 2004/108/EG, 98/37/EG 28. 12. 2009 p. ), 2006/42/EG ( 29. 12. 2009 p. ). [. . . ]